Note: GitHub Enterprise Server clustering must be configured with HTTPS.
Installing GitHub Enterprise Server
- On each cluster node, provision and install GitHub Enterprise Server. For more information, see "Setting up a GitHub Enterprise Server instance."
- Using the administrative shell or DHCP, only configure the IP address of each node. Don't configure any other settings.
Configuring the first node
- Connect to the node that will be designated as MySQL primary in
cluster.conf
. For more information, see "About the cluster configuration file." - In your web browser, visit
https://<ip address>:8443/setup/
. - At the prompt, upload your license file and set a management console password. For more information, see "Managing your license for GitHub Enterprise."
- In the Management Console, configure and save your desired settings.
- The instance will restart automatically.
Initializing the cluster
To initialize the cluster, you need a cluster configuration file (cluster.conf
). For more information, see "About the cluster configuration file".
- From the first node that was configured, run
ghe-cluster-config-init
. This will initialize the cluster if there are nodes in the cluster configuration file that are not configured. - Run
ghe-cluster-config-apply
. This will validate thecluster.conf
file, apply the configuration to each node file and bring up the configured services on each node.
To check the status of a running cluster use the ghe-cluster-status
command.
About the cluster configuration file
The cluster configuration file (cluster.conf
) defines the nodes in the cluster, and what services they run.
For more information, see "About cluster nodes."
This example cluster.conf
defines a cluster with 11 nodes.
- Two nodes called
ghes-front-end-node-\*
run services responsible for responding to client requests. - Three nodes called
ghes-database-node-\*
run services responsible for storage, retrieval, and replication of database data. - Three nodes called
ghes-search-node-\*
run services responsible for search functionality. - Three nodes called
ghes-storage-node-\*
run services responsible for storage, retrieval, and replication of data.
The names of the nodes can be any valid hostname you choose. The names are set as the hostname of each node, and will also be added to /etc/hosts
on each node, so that the nodes are locally resolvable to each other.
Specify the first cluster node you configured as the MySQL primary via mysql-server
and mysql-master
.
[cluster]
mysql-master = ghes-database-node-1
redis-master = ghes-database-node-1
primary-datacenter = primary
[cluster "ghes-front-end-node-1"]
hostname = ghes-front-end-node-1
ipv4 = 192.168.0.2
# ipv6 = fd12:3456:789a:1::2
consul-datacenter = primary
datacenter = primary
web-server = true
job-server = true
memcache-server = true
[cluster "ghes-front-end-node-2"]
hostname = ghes-front-end-node-2
ipv4 = 192.168.0.3
# ipv6 = fd12:3456:789a:1::3
consul-datacenter = primary
datacenter = primary
web-server = true
job-server = true
memcache-server = true
[cluster "ghes-database-node-1"]
hostname = ghes-database-node-1
ipv4 = 192.168.0.4
# ipv6 = fd12:3456:789a:1::4
consul-datacenter = primary
datacenter = primary
consul-server = true
mysql-server = true
redis-server = true
[cluster "ghes-database-node-2"]
hostname = ghes-database-node-2
ipv4 = 192.168.0.5
# ipv6 = fd12:3456:789a:1::5
consul-datacenter = primary
datacenter = primary
consul-server = true
mysql-server = true
redis-server = true
[cluster "ghes-database-node-3"]
hostname = ghes-database-node-3
ipv4 = 192.168.0.6
# ipv6 = fd12:3456:789a:1::6
consul-datacenter = primary
datacenter = primary
consul-server = true
mysql-server = true
redis-server = true
[cluster "ghes-search-node-1"]
hostname = ghes-search-node-1
ipv4 = 192.168.0.7
# ipv6 = fd12:3456:789a:1::7
consul-datacenter = primary
datacenter = primary
elasticsearch-server = true
[cluster "ghes-search-node-2"]
hostname = ghes-search-node-2
ipv4 = 192.168.0.8
# ipv6 = fd12:3456:789a:1::8
consul-datacenter = primary
datacenter = primary
elasticsearch-server = true
[cluster "ghes-search-node-3"]
hostname = ghes-search-node-3
ipv4 = 192.168.0.9
# ipv6 = fd12:3456:789a:1::9
consul-datacenter = primary
datacenter = primary
elasticsearch-server = true
[cluster "ghes-storage-node-1"]
hostname = ghes-storage-node-1
ipv4 = 192.168.0.10
# ipv6 = fd12:3456:789a:1::10
consul-datacenter = primary
datacenter = primary
git-server = true
pages-server = true
storage-server = true
metrics-server = true
[cluster "ghes-storage-node-2"]
hostname = ghes-storage-node-2
ipv4 = 192.168.0.11
# ipv6 = fd12:3456:789a:1::11
consul-datacenter = primary
datacenter = primary
git-server = true
pages-server = true
storage-server = true
metrics-server = true
[cluster "ghes-storage-node-3"]
hostname = ghes-storage-node-3
ipv4 = 192.168.0.12
# ipv6 = fd12:3456:789a:1::12
consul-datacenter = primary
datacenter = primary
git-server = true
pages-server = true
storage-server = true
metrics-server = true
Create the file /data/user/common/cluster.conf
on the configured first node. For example, using vim
:
ghe-data-node-1:~$ sudo vim /data/user/common/cluster.conf