Skip to main content

Эта версия GitHub Enterprise Server была прекращена 2024-03-26. Исправления выпускаться не будут даже при критических проблемах безопасности. Для повышения производительности, повышения безопасности и новых функций выполните обновление до последней версии GitHub Enterprise Server. Чтобы получить справку по обновлению, обратитесь в службу поддержки GitHub Enterprise.

Мониторинг с помощью SNMP

GitHub Enterprise предоставляет данные об использовании диска, ЦП, памяти и т. д. по протоколу SNMP.

SNMP is a common standard for monitoring devices over a network. We strongly recommend enabling SNMP so you can monitor the health of your GitHub Enterprise Server instance and know when to add more memory, storage, or processor power to the host machine.

GitHub Enterprise has a standard SNMP installation, so you can take advantage of the many plugins available for Nagios or for any other monitoring system.

Configuring SNMP v2c

  1. From an administrative account on GitHub Enterprise Server, in the upper-right corner of any page, click .

  2. If you're not already on the "Site admin" page, in the upper-left corner, click Site admin.

  3. In the " Site admin" sidebar, click Management Console.

  4. In "Settings" sidebar, click Monitoring.

  5. Under "Monitoring", select Enable SNMP.

  6. In the Community string field, enter a new community string. If left blank, this defaults to public.

  7. Under the "Settings" sidebar, click Save settings.

    Note: Saving settings in the Management Console restarts system services, which could result in user-visible downtime.

  8. Wait for the configuration run to complete.

  9. Test your SNMP configuration by running the following command on a separate workstation with SNMP support in your network:

    # community-string is your community string
    # hostname is the IP or domain of your Enterprise instance
    $ snmpget -v 2c -c COMMUNITY-STRING -O e HOSTNAME hrSystemDate.0
    

This should return the system time on your GitHub Enterprise Server instance host.

User-based security

If you enable SNMP v3, you can take advantage of increased user based security through the User Security Model (USM). For each unique user, you can specify a security level:

  • noAuthNoPriv: This security level provides no authentication and no privacy.
  • authNoPriv: This security level provides authentication but no privacy. To query the appliance you'll need a username and password (that must be at least eight characters long). Information is sent without encryption, similar to SNMPv2. The authentication protocol can be either MD5 or SHA and defaults to SHA.
  • authPriv: This security level provides authentication with privacy. Authentication, including a minimum eight-character authentication password, is required and responses are encrypted. A privacy password is not required, but if provided it must be at least eight characters long. If a privacy password isn't provided, the authentication password is used. The privacy protocol can be either DES or AES and defaults to AES.

Configuring users for SNMP v3

  1. From an administrative account on GitHub Enterprise Server, in the upper-right corner of any page, click .

  2. If you're not already on the "Site admin" page, in the upper-left corner, click Site admin.

  3. In the " Site admin" sidebar, click Management Console.

  4. In "Settings" sidebar, click Monitoring.

  5. Under "Monitoring", select Enable SNMP.

  6. Select SNMP v3.

  7. Under "Username", type the unique username of your SNMP v3 user.

  8. Select the Security Level dropdown menu, then click the security level for your SNMP v3 user.

  9. For SNMP v3 users with the authnopriv security level, configure authentication.

    • Under "Authentication password", type the authentication password.
    • Next to "Authentication password", select the Protocol dropdown menu, then click the authentication protocol you want to use.
    • If your external monitoring system requires the SHA algorithm, GitHub Enterprise Server currently uses SHA-1.
  10. For SNMP v3 users with the authpriv security level, configure authentication.

    • Under "Authentication password", type the authentication password.
    • Next to "Authentication password", select the Protocol dropdown menu, then click the authentication protocol you want to use.
    • Optionally, under "Privacy password", type the privacy password.
    • Next to "Privacy password", select the Protocol dropdown menu, then click the privacy protocol method you want to use.
    • If your external monitoring system requires the AES algorithm, GitHub Enterprise Server currently uses AES-128.
  11. Click Add user.

  12. Under the "Settings" sidebar, click Save settings.

    Note: Saving settings in the Management Console restarts system services, which could result in user-visible downtime.

  13. Wait for the configuration run to complete.

Querying SNMP data

Both hardware and software-level information about your appliance is available with SNMP v3. Due to the lack of encryption and privacy for the noAuthNoPriv and authNoPriv security levels, we exclude the hrSWRun table (1.3.6.1.2.1.25.4) from the resulting SNMP reports. We include this table if you're using the authPriv security level. For more information, see the "OID reference documentation."

With SNMP v2c, only hardware-level information about your appliance is available. The applications and services within GitHub Enterprise do not have OIDs configured to report metrics. Several MIBs are available, which you can see by running snmpwalk on a separate workstation with SNMP support in your network:

# community-string is your community string
# hostname is the IP or domain of your Enterprise instance
$ snmpwalk -v 2c -c COMMUNITY-STRING -O e HOSTNAME

Of the available MIBs for SNMP, the most useful is HOST-RESOURCES-MIB (1.3.6.1.2.1.25). See the table below for some important objects in this MIB:

NameOIDDescription
hrSystemDate.21.3.6.1.2.1.25.1.2The hosts notion of the local date and time of day.
hrSystemUptime.01.3.6.1.2.1.25.1.1.0How long it's been since the host was last initialized.
hrMemorySize.01.3.6.1.2.1.25.2.2.0The amount of RAM on the host.
hrSystemProcesses.01.3.6.1.2.1.25.1.6.0The number of process contexts currently loaded or running on the host.
hrStorageUsed.11.3.6.1.2.1.25.2.3.1.6.1The amount of storage space consumed on the host, in hrStorageAllocationUnits.
hrStorageAllocationUnits.11.3.6.1.2.1.25.2.3.1.4.1The size, in bytes, of an hrStorageAllocationUnit

For example, to query for hrMemorySize with SNMP v3, run the following command on a separate workstation with SNMP support in your network:

# username is the unique username of your SNMP v3 user
# auth password is the authentication password
# privacy password is the privacy password
# hostname is the IP or domain of your Enterprise instance
$ snmpget -v 3 -u USERNAME -l authPriv \
  -A "AUTH PASSWORD" -a SHA \
  -X "PRIVACY PASSWORD" -x AES \
  -O e HOSTNAME HOST-RESOURCES-MIB::hrMemorySize.0

With SNMP v2c, to query for hrMemorySize, run the following command on a separate workstation with SNMP support in your network:

# community-string is your community string
# hostname is the IP or domain of your Enterprise instance
snmpget -v 2c -c COMMUNITY-STRING HOSTNAME HOST-RESOURCES-MIB::hrMemorySize.0

Note: To prevent leaking information about services running on your appliance, we exclude the hrSWRun table (1.3.6.1.2.1.25.4) from the resulting SNMP reports unless you're using the authPriv security level with SNMP v3. If you're using the authPriv security level, we include the hrSWRun table.

For more information on OID mappings for common system attributes in SNMP, see "Linux SNMP OID’s for CPU, Memory and Disk Statistics".