Basic writing and formatting syntax

Create sophisticated formatting for your prose and code on GitHub with simple syntax.

Headings

To create a heading, add one to six # symbols before your heading text. The number of # you use will determine the size of the heading.

# The largest heading
## The second largest heading
###### The smallest heading

Rendered H1, H2, and H6 headings

Styling text

You can indicate emphasis with bold, italic, or strikethrough text in comment fields and .md files.

StyleSyntaxKeyboard shortcutExampleOutput
Bold** ** or __ __command/control + b**This is bold text**This is bold text
Italic* * or _ _     command/control + i*This text is italicized*This text is italicized
Strikethrough~~ ~~~~This was mistaken text~~This was mistaken text
Bold and nested italic** ** and _ _**This text is _extremely_ important**This text is extremely important
All bold and italic*** ******All this text is important***All this text is important

Quoting text

You can quote text with a >.

Text that is not a quote

> Text that is a quote

Rendered quoted text

Tip: When viewing a conversation, you can automatically quote text in a comment by highlighting the text, then typing r. You can quote an entire comment by clicking , then Quote reply. For more information about keyboard shortcuts, see "Keyboard shortcuts."

Quoting code

You can call out code or a command within a sentence with single backticks. The text within the backticks will not be formatted. You can also press the command or Ctrl + e keyboard shortcut to insert the backticks for a code block within a line of Markdown.

Use `git status` to list all new or modified files that haven't yet been committed.

Rendered inline code block

To format code or text into its own distinct block, use triple backticks.

Some basic Git commands are:
```
git status
git add
git commit
```

Rendered code block

For more information, see "Creating and highlighting code blocks."

You can create an inline link by wrapping link text in brackets [ ], and then wrapping the URL in parentheses ( ). You can also use the keyboard shortcut command + k to create a link. When you have text selected, you can paste a URL from your clipboard to automatically create a link from the selection.

This site was built using [GitHub Pages](https://pages.github.com/).

Rendered link

Tip: GitHub automatically creates links when valid URLs are written in a comment. For more information, see "Autolinked references and URLs."

Puedes vincular directamente a una sección en un archivo expedido si deslizas el puntero sobre el encabezado de la sección para exponer el enlace:

Enlace de sección con el archivo README para el repositorio de github/scientist

Puedes definir enlaces relativos y rutas de imagen en los archivos representados para ayudar a que los lectores naveguen hasta otros archivos de tu repositorio.

Un enlace relativo es un enlace que es relativo al archivo actual. Por ejemplo, si tienes un archivo README en la raíz de tu repositorio y tienes otro archivo en docs/CONTRIBUTING.md, el enlace relativo a CONTRIBUTING.md en tu archivo README podría verse así:

[Contribution guidelines for this project](docs/CONTRIBUTING.md)

GitHub transformará de manera automática el enlace relativo o la ruta de imagen en cualquier rama en la que te encuentres actualmente, de modo que el enlace o ruta siempre funcione. Puedes usar todos los operandos del enlace relativo, como ./ y ../.

Los enlaces relativos son más sencillos para los usuarios que clonan tu repositorio. Puede que los enlaces absolutos no funcionen en los clones de tu repositorio. Recomendamos usar enlaces relativos para consultar los archivos dentro de tu repositorio.

Images

You can display an image by adding ! and wrapping the alt text in[ ]. Then wrap the link for the image in parentheses ().

![This is an image](https://myoctocat.com/assets/images/base-octocat.svg)

Rendered Image

GitHub supports embedding images into your issues, pull requests, discussions, comments and .md files. You can display an image from your repository, add a link to an online image, or upload an image. For more information, see "Uploading assets."

Tip: When you want to display an image which is in your repository, you should use relative links instead of absolute links.

Here are some examples for using relative links to display an image.

ContextRelative Link
In a .md file on the same branch/assets/images/electrocat.png
In a .md file on another branch/../main/assets/images/electrocat.png
In issues, pull requests and comments of the repository../blob/main/assets/images/electrocat.png
In a .md file in another repository/../../../../github/docs/blob/main/assets/images/electrocat.png
In issues, pull requests and comments of another repository../../../github/docs/blob/main/assets/images/electrocat.png?raw=true

Note: The last two relative links in the table above will work for images in a private repository only if the viewer has at least read access to the private repository which contains these images.

For more information, see "Relative Links."

Specifying the theme an image is shown to

You can specify the theme an image is displayed to by appending #gh-dark-mode-only or #gh-light-mode-only to the end of an image URL, in Markdown.

We distinguish between light and dark color modes, so there are two options available. You can use these options to display images optimized for dark or light backgrounds. This is particularly helpful for transparent PNG images.

ContextURL
Dark Theme![GitHub Light](https://github.com/github-light.png#gh-dark-mode-only)
Light Theme![GitHub Dark](https://github.com/github-dark.png#gh-light-mode-only)

Lists

You can make an unordered list by preceding one or more lines of text with - or *.

- George Washington
- John Adams
- Thomas Jefferson

Rendered unordered list

To order your list, precede each line with a number.

1. James Madison
2. James Monroe
3. John Quincy Adams

Rendered ordered list

Nested Lists

You can create a nested list by indenting one or more list items below another item.

To create a nested list using the web editor on GitHub or a text editor that uses a monospaced font, like Atom, you can align your list visually. Type space characters in front of your nested list item, until the list marker character (- or *) lies directly below the first character of the text in the item above it.

1. First list item
   - First nested list item
     - Second nested list item

Nested list with alignment highlighted

List with two levels of nested items

To create a nested list in the comment editor on GitHub, which doesn't use a monospaced font, you can look at the list item immediately above the nested list and count the number of characters that appear before the content of the item. Then type that number of space characters in front of the nested list item.

In this example, you could add a nested list item under the list item 100. First list item by indenting the nested list item a minimum of five spaces, since there are five characters (100. ) before First list item.

100. First list item
     - First nested list item

List with a nested list item

You can create multiple levels of nested lists using the same method. For example, because the first nested list item has seven characters (␣␣␣␣␣-␣) before the nested list content First nested list item, you would need to indent the second nested list item by seven spaces.

100. First list item
     - First nested list item
       - Second nested list item

List with two levels of nested items

For more examples, see the GitHub Flavored Markdown Spec.

Task lists

Para crear una lista de tareas, introduce los elementos de la lista con un caracter de espacio regular, seguido de [ ]. Para marcar una tarea como completada, utiliza [x].

- [x] #739
- [ ] https://github.com/octo-org/octo-repo/issues/740
- [ ] Add delight to the experience when all tasks are complete :tada:

Lista de tareas generada

If a task list item description begins with a parenthesis, you'll need to escape it with \:

- [ ] \(Optional) Open a followup issue

For more information, see "About task lists."

Mentioning people and teams

You can mention a person or team on GitHub by typing @ plus their username or team name. This will trigger a notification and bring their attention to the conversation. People will also receive a notification if you edit a comment to mention their username or team name. For more information about notifications, see "About notifications."

@github/support What do you think about these updates?

Rendered @mention

When you mention a parent team, members of its child teams also receive notifications, simplifying communication with multiple groups of people. For more information, see "About teams."

Typing an @ symbol will bring up a list of people or teams on a project. The list filters as you type, so once you find the name of the person or team you are looking for, you can use the arrow keys to select it and press either tab or enter to complete the name. For teams, enter the @organization/team-name and all members of that team will get subscribed to the conversation.

The autocomplete results are restricted to repository collaborators and any other participants on the thread.

Referencing issues and pull requests

You can bring up a list of suggested issues and pull requests within the repository by typing #. Type the issue or pull request number or title to filter the list, and then press either tab or enter to complete the highlighted result.

For more information, see "Autolinked references and URLs."

Referencing external resources

Si se configuran las referencias autovinculadas personalizadas para un repositorio, entonces las referencias a recursos externos, como un informe de problemas de JIRA o un ticket de Zendesk, se convertirán en vínculos acortados. Para saber qué autovínculos se encuentran disponibles en tu repositorio, contacta a alguien con permisos administrativos sobre el mismo. Para obtener más información, consulta la sección "Configurar autovínculos para referenciar recursos externos".

Uploading assets

You can upload assets like images by dragging and dropping, selecting from a file browser, or pasting. You can upload assets to issues, pull requests, comments, and .md files in your repository.

Using emoji

You can add emoji to your writing by typing :EMOJICODE:.

@octocat :+1: This PR looks great - it's ready to merge! :shipit:

Rendered emoji

Typing : will bring up a list of suggested emoji. The list will filter as you type, so once you find the emoji you're looking for, press Tab or Enter to complete the highlighted result.

For a full list of available emoji and codes, check out the Emoji-Cheat-Sheet.

Paragraphs

You can create a new paragraph by leaving a blank line between lines of text.

Footnotes

You can add footnotes to your content by using this bracket syntax:

Here is a simple footnote[^1].

A footnote can also have multiple lines[^2].  

You can also use words, to fit your writing style more closely[^note].

[^1]: My reference.
[^2]: Every new line should be prefixed with 2 spaces.  
  This allows you to have a footnote with multiple lines.
[^note]:
    Named footnotes will still render with numbers instead of the text but allow easier identification and linking.  
    This footnote also has been made with a different syntax using 4 spaces for new lines.

The footnote will render like this:

Rendered footnote

Note: The position of a footnote in your Markdown does not influence where the footnote will be rendered. You can write a footnote right after your reference to the footnote, and the footnote will still render at the bottom of the Markdown.

Hiding content with comments

You can tell GitHub to hide content from the rendered Markdown by placing the content in an HTML comment.

<!-- This content will not appear in the rendered Markdown -->

Ignoring Markdown formatting

You can tell GitHub to ignore (or escape) Markdown formatting by using \ before the Markdown character.

Let's rename \*our-new-project\* to \*our-old-project\*.

Rendered escaped character

For more information, see Daring Fireball's "Markdown Syntax."

Disabling Markdown rendering

Cuando ves un archivo de lenguaje de marcado, puedes hacer clic en el en la parte superior de este para inhabilitar la representación de lenguaje de marcado y ver en su lugar el código fuente del archivo.

Mostrar el lenguaje de marcado como código fuente

El inhabilitar la interpretación de lenguaje de marcado te permite utilizar las características de vista de código fuente, tales como el enlazado de líneas, el cual no es posible cuando se está viendo un archivo interpretado en lenguaje de marcado.

Further reading

¿Te ayudó este documento?

Política de privacidad

¡Ayúdanos a hacer geniales estos documentos!

Todos los documentos de GitHub son de código abierto. ¿Notas algo que esté mal o que no sea claro? Emite una solicitud de cambios.

Haz una contribución

O, aprende cómo contribuir.