Workflow commands for GitHub Actions

About workflow commands

Actions can communicate with the runner machine to set environment variables, output values used by other actions, add debug messages to the output logs, and other tasks.

Most workflow commands use the echo command in a specific format, while others are invoked by writing to a file. For more information, see "Environment files."

Example

echo "::workflow-command parameter1={data},parameter2={data}::{command value}"

Write-Output "::workflow-command parameter1={data},parameter2={data}::{command value}"

Using workflow commands to access toolkit functions

The actions/toolkit includes a number of functions that can be executed as workflow commands. Use the :: syntax to run the workflow commands within your YAML file; these commands are then sent to the runner over stdout. For example, instead of using code to set an output, as below:

core.setOutput('SELECTED_COLOR', 'green');

Example: Setting a value

You can use the set-output command in your workflow to set the same value:

      - name: Set selected color
        run: echo '::set-output name=SELECTED_COLOR::green'
        id: random-color-generator
      - name: Get color
        run: echo "The selected color is ${{ steps.random-color-generator.outputs.SELECTED_COLOR }}"

      - name: Set selected color
        run: Write-Output "::set-output name=SELECTED_COLOR::green"
        id: random-color-generator
      - name: Get color
        run: Write-Output "The selected color is ${{ steps.random-color-generator.outputs.SELECTED_COLOR }}"

The following table shows which toolkit functions are available within a workflow:

Setting an output parameter

Sets an action's output parameter.

::set-output name={name}::{value}

Optionally, you can also declare output parameters in an action's metadata file. For more information, see "Metadata syntax for GitHub Actions."

You can escape multiline strings for setting an output parameter by creating an environment variable and using it in a workflow command. For more information, see "Setting an environment variable."

Example: Setting an output parameter

echo "::set-output name=action_fruit::strawberry"

Write-Output "::set-output name=action_fruit::strawberry"

Setting a debug message

Prints a debug message to the log. You must create a secret named ACTIONS_STEP_DEBUG with the value true to see the debug messages set by this command in the log. For more information, see "Enabling debug logging."

::debug::{message}

Example: Setting a debug message

echo "::debug::Set the Octocat variable"

Write-Output "::debug::Set the Octocat variable"

Setting a notice message

Creates a notice message and prints the message to the log. This message will create an annotation, which can associate the message with a particular file in your repository. Optionally, your message can specify a position within the file.

::notice file={name},line={line},endLine={endLine},title={title}::{message}

Example: Setting a notice message

echo "::notice file=app.js,line=1,col=5,endColumn=7::Missing semicolon"

Write-Output "::notice file=app.js,line=1,col=5,endColumn=7::Missing semicolon"

Setting a warning message

Creates a warning message and prints the message to the log. This message will create an annotation, which can associate the message with a particular file in your repository. Optionally, your message can specify a position within the file.

::warning file={name},line={line},endLine={endLine},title={title}::{message}

Example: Setting a warning message

echo "::warning file=app.js,line=1,col=5,endColumn=7::Missing semicolon"

Write-Output "::warning file=app.js,line=1,col=5,endColumn=7::Missing semicolon"

Setting an error message

Creates an error message and prints the message to the log. This message will create an annotation, which can associate the message with a particular file in your repository. Optionally, your message can specify a position within the file.

::error file={name},line={line},endLine={endLine},title={title}::{message}

Example: Setting an error message

echo "::error file=app.js,line=1,col=5,endColumn=7::Missing semicolon"

Write-Output "::error file=app.js,line=1,col=5,endColumn=7::Missing semicolon"

Grouping log lines

Creates an expandable group in the log. To create a group, use the group command and specify a title. Anything you print to the log between the group and endgroup commands is nested inside an expandable entry in the log.

::group::{title}
::endgroup::

Example: Grouping log lines

jobs:
  bash-example:
    runs-on: ubuntu-latest
    steps:
      - name: Group of log lines
        run: |
            echo "::group::My title"
            echo "Inside group"
            echo "::endgroup::"

jobs:
  powershell-example:
    runs-on: windows-latest
    steps:
      - name: Group of log lines
        run: |
            Write-Output "::group::My title"
            Write-Output "Inside group"
            Write-Output "::endgroup::"

Masking a value in log

::add-mask::{value}

Masking a value prevents a string or variable from being printed in the log. Each masked word separated by whitespace is replaced with the * character. You can use an environment variable or string for the mask's value. When you mask a value, it is treated as a secret and will be redacted on the runner. For example, after you mask a value, you won't be able to set that value as an output.

Example: Masking a string

When you print "Mona The Octocat" in the log, you'll see "***".

echo "::add-mask::Mona The Octocat"

Write-Output "::add-mask::Mona The Octocat"

Example: Masking an environment variable

When you print the variable MY_NAME or the value "Mona The Octocat" in the log, you'll see "***" instead of "Mona The Octocat".

jobs:
  bash-example:
    runs-on: ubuntu-latest
    env:
      MY_NAME: "Mona The Octocat"
    steps:
      - name: bash-version
        run: echo "::add-mask::$MY_NAME"

jobs:
  powershell-example:
    runs-on: windows-latest
    env:
      MY_NAME: "Mona The Octocat"
    steps:
      - name: powershell-version
        run: Write-Output "::add-mask::$env:MY_NAME"

Stopping and starting workflow commands

Stops processing any workflow commands. This special command allows you to log anything without accidentally running a workflow command. For example, you could stop logging to output an entire script that has comments.

::stop-commands::{endtoken}

To stop the processing of workflow commands, pass a unique token to stop-commands. To resume processing workflow commands, pass the same token that you used to stop workflow commands.

::{endtoken}::

Example: Stopping and starting workflow commands

jobs:
  workflow-command-job:
    runs-on: ubuntu-latest
    steps:
      - name: Disable workflow commands
        run: |
          echo '::warning:: This is a warning message, to demonstrate that commands are being processed.'
          stopMarker=$(uuidgen)
          echo "::stop-commands::$stopMarker"
          echo '::warning:: This will NOT be rendered as a warning, because stop-commands has been invoked.'
          echo "::$stopMarker::"
          echo '::warning:: This is a warning again, because stop-commands has been turned off.'

jobs:
  workflow-command-job:
    runs-on: windows-latest
    steps:
      - name: Disable workflow commands
        run: |
          Write-Output '::warning:: This is a warning message, to demonstrate that commands are being processed.'
          $stopMarker = New-Guid
          Write-Output "::stop-commands::$stopMarker"
          Write-Output '::warning:: This will NOT be rendered as a warning, because stop-commands has been invoked.'
          Write-Output "::$stopMarker::"
          Write-Output '::warning:: This is a warning again, because stop-commands has been turned off.'

Echoing command outputs

Enables or disables echoing of workflow commands. For example, if you use the set-output command in a workflow, it sets an output parameter but the workflow run's log does not show the command itself. If you enable command echoing, then the log shows the command, such as ::set-output name={name}::{value}.

::echo::on
::echo::off

Command echoing is disabled by default. However, a workflow command is echoed if there are any errors processing the command.

The add-mask, debug, warning, and error commands do not support echoing because their outputs are already echoed to the log.

You can also enable command echoing globally by turning on step debug logging using the ACTIONS_STEP_DEBUG secret. For more information, see "Enabling debug logging". In contrast, the echo workflow command lets you enable command echoing at a more granular level, rather than enabling it for every workflow in a repository.

Example: Toggling command echoing

jobs:
  workflow-command-job:
    runs-on: ubuntu-latest
    steps:
      - name: toggle workflow command echoing
        run: |
          echo '::set-output name=action_echo::disabled'
          echo '::echo::on'
          echo '::set-output name=action_echo::enabled'
          echo '::echo::off'
          echo '::set-output name=action_echo::disabled'

jobs:
  workflow-command-job:
    runs-on: windows-latest
    steps:
      - name: toggle workflow command echoing
        run: |
          write-output "::set-output name=action_echo::disabled"
          write-output "::echo::on"
          write-output "::set-output name=action_echo::enabled"
          write-output "::echo::off"
          write-output "::set-output name=action_echo::disabled"

The example above prints the following lines to the log:

::set-output name=action_echo::enabled
::echo::off

Only the second set-output and echo workflow commands are included in the log because command echoing was only enabled when they were run. Even though it is not always echoed, the output parameter is set in all cases.

Sending values to the pre and post actions

You can use the save-state command to create environment variables for sharing with your workflow's pre: or post: actions. For example, you can create a file with the pre: action, pass the file location to the main: action, and then use the post: action to delete the file. Alternatively, you could create a file with the main: action, pass the file location to the post: action, and also use the post: action to delete the file.

If you have multiple pre: or post: actions, you can only access the saved value in the action where save-state was used. For more information on the post: action, see "Metadata syntax for GitHub Actions."

The save-state command can only be run within an action, and is not available to YAML files. The saved value is stored as an environment value with the STATE_ prefix.

This example uses JavaScript to run the save-state command. The resulting environment variable is named STATE_processID with the value of 12345:

console.log('::save-state name=processID::12345')

The STATE_processID variable is then exclusively available to the cleanup script running under the main action. This example runs in main and uses JavaScript to display the value assigned to the STATE_processID environment variable:

console.log("The running PID from the main action is: " +  process.env.STATE_processID);

Environment files

During the execution of a workflow, the runner generates temporary files that can be used to perform certain actions. The path to these files are exposed via environment variables. You will need to use UTF-8 encoding when writing to these files to ensure proper processing of the commands. Multiple commands can be written to the same file, separated by newlines.

Most commands in the following examples use double quotes for echoing strings, which will attempt to interpolate characters like $ for shell variable names. To always use literal values in quoted strings, you can use single quotes instead.

jobs:
  legacy-powershell-example:
    runs-on: windows-latest
    steps:
      - shell: powershell
        run: |
          "mypath" | Out-File -FilePath $env:GITHUB_PATH -Encoding utf8 -Append

jobs:
  powershell-core-example:
    runs-on: windows-latest
    steps:
      - shell: pwsh
        run: |
          "mypath" >> $env:GITHUB_PATH

Setting an environment variable

echo "{environment_variable_name}={value}" >> $GITHUB_ENV

You can make an environment variable available to any subsequent steps in a workflow job by defining or updating the environment variable and writing this to the GITHUB_ENV environment file. The step that creates or updates the environment variable does not have access to the new value, but all subsequent steps in a job will have access. The names of environment variables are case-sensitive, and you can include punctuation. For more information, see "Environment variables."

Example

steps:
  - name: Set the value
    id: step_one
    run: |
      echo "action_state=yellow" >> $GITHUB_ENV
  - name: Use the value
    id: step_two
    run: |
      echo "${{ env.action_state }}" # This will output 'yellow'

steps:
  - name: Set the value
    id: step_one
    run: |
      "action_state=yellow" >> $env:GITHUB_ENV
  - name: Use the value
    id: step_two
    run: |
      Write-Output "${{ env.action_state }}" # This will output 'yellow'

Multiline strings

For multiline strings, you may use a delimiter with the following syntax.

{name}<<{delimiter}
{value}
{delimiter}

Example

This example uses EOF as a delimiter, and sets the JSON_RESPONSE environment variable to the value of the curl response.

steps:
  - name: Set the value in bash
    id: step_one
    run: |
      echo 'JSON_RESPONSE<<EOF' >> $GITHUB_ENV
      curl https://example.com >> $GITHUB_ENV
      echo 'EOF' >> $GITHUB_ENV

steps:
  - name: Set the value in pwsh
    id: step_one
    run: |
      "JSON_RESPONSE<<EOF" >> $env:GITHUB_ENV
      (Invoke-WebRequest -Uri "https://example.com").Content >> $env:GITHUB_ENV
      "EOF" >> $env:GITHUB_ENV
    shell: pwsh

Adding a system path

Prepends a directory to the system PATH variable and automatically makes it available to all subsequent actions in the current job; the currently running action cannot access the updated path variable. To see the currently defined paths for your job, you can use echo "$PATH" in a step or an action.

echo "{path}" >> $GITHUB_PATH

"{path}" >> $env:GITHUB_PATH

Example

echo "$HOME/.local/bin" >> $GITHUB_PATH

"$env:HOMEPATH/.local/bin" >> $env:GITHUB_PATH