패키지에 대한 REST API 엔드포인트

GitHub Packages 정보

          GitHub Packages 는 패키지를 게시하기 위한 다양한 패키지 관리자를 지원합니다. 자세한 내용은 [AUTOTITLE](/packages/learn-github-packages/introduction-to-github-packages#supported-clients-and-formats)을(를) 참조하세요.

패키지를 게시한 후 REST API를 사용하여 리포지토리 및 조직에서 패키지를 관리할 수 있습니다 GitHub . 자세한 내용은 패키지 삭제 및 복원을(를) 참조하세요.

REST API를 사용하여 GitHub Packages를 관리하려면, personal access token (classic)을(를) 사용하여 인증해야 합니다.

패키지 메타데이터에 액세스하려면 토큰에 read:packages 범위가 포함되어야 합니다.
패키지 및 패키지 버전을 삭제하려면 토큰에 read:packages 및 delete:packages 범위가 포함되어야 합니다.
패키지 및 패키지 버전을 복원하려면 토큰에 read:packages 및 write:packages 범위가 포함되어야 합니다.

패키지가 세분화된 권한을 지원하는 레지스트리에 있는 경우 토큰은 이 패키지에 액세스하거나 관리하기 위한 repo 범위가 필요하지 않습니다. 패키지가 리포지토리 범위의 권한만 지원하는 레지스트리에 있는 경우, 패키지가 리포지토리에서 GitHub 권한을 상속하므로 토큰에도 repo 범위가 포함되어야 합니다. 리포지토리 범위 권한만 지원하는 레지스트리 목록은 GitHub 패키지에 대한 사용 권한 정보을(를) 참조하세요.

SSO를 사용하도록 설정된 조직의 리소스에 액세스하려면 personal access token (classic)에 대해 SSO를 사용하도록 설정해야 합니다. 자세한 내용은 Single Sign-On에 사용할 개인용 액세스 토큰 권한 부여을(를) 참조하세요.

Get list of conflicting packages during Docker migration for organization

Lists all packages that are in a specific organization, are readable by the requesting user, and that encountered a conflict during a Docker migration.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint.

Fine-grained access tokens for "Get list of conflicting packages during Docker migration for organization"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

This endpoint can be used without authentication if only public resources are requested.

"Get list of conflicting packages during Docker migration for organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`org` string 필수 The organization name. The name is not case sensitive.

HTTP response status codes for "Get list of conflicting packages during Docker migration for organization"

Status code	설명
`200`	OK
`401`	Requires authentication
`403`	Forbidden

Code samples for "Get list of conflicting packages during Docker migration for organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/orgs/{org}/docker/conflicts

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/docker/conflicts

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker"
  }
]

List packages for an organization

Lists packages in an organization readable by the user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "List packages for an organization"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"List packages for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`org` string 필수 The organization name. The name is not case sensitive.

쿼리 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`visibility` string The selected visibility of the packages. This parameter is optional and only filters an existing result set. The `internal` visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems `internal` is synonymous with `private`. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages." 다음 중 하나일 수 있습니다.: `public`, `private`, `internal`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." 기본값: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." 기본값: `30`

HTTP response status codes for "List packages for an organization"

Status code	설명
`200`	OK
`400`	The value of `per_page` multiplied by `page` cannot be greater than 10000.
`401`	Requires authentication
`403`	Forbidden

Code samples for "List packages for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/orgs/{org}/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  "https://api.github.com/orgs/ORG/packages?package_type=container"

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker"
  }
]

Get a package for an organization

Gets a specific package in an organization.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Get a package for an organization"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Get a package for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.

HTTP response status codes for "Get a package for an organization"

Status code	설명
`200`	OK

Code samples for "Get a package for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/orgs/{org}/packages/{package_type}/{package_name}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200

{
  "id": 197,
  "name": "hello_docker",
  "package_type": "container",
  "owner": {
    "login": "github",
    "id": 9919,
    "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
    "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/github",
    "html_url": "https://github.com/github",
    "followers_url": "https://api.github.com/users/github/followers",
    "following_url": "https://api.github.com/users/github/following{/other_user}",
    "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/github/subscriptions",
    "organizations_url": "https://api.github.com/users/github/orgs",
    "repos_url": "https://api.github.com/users/github/repos",
    "events_url": "https://api.github.com/users/github/events{/privacy}",
    "received_events_url": "https://api.github.com/users/github/received_events",
    "type": "Organization",
    "site_admin": false
  },
  "version_count": 1,
  "visibility": "private",
  "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
  "created_at": "2020-05-19T22:19:11Z",
  "updated_at": "2020-05-19T22:19:11Z",
  "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
}

Delete a package for an organization

Deletes an entire package in an organization. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

The authenticated user must have admin permissions in the organization to use this endpoint. If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must also have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Delete a package for an organization"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Delete a package for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.

HTTP response status codes for "Delete a package for an organization"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Delete a package for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

delete/orgs/{org}/packages/{package_type}/{package_name}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for an organization

Restores an entire package in an organization.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

The authenticated user must have admin permissions in the organization to use this endpoint. If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must also have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Restore a package for an organization"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Restore a package for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.

쿼리 매개 변수
이름, 유형, 설명
`token` string package token

HTTP response status codes for "Restore a package for an organization"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Restore a package for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

post/orgs/{org}/packages/{package_type}/{package_name}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by an organization

Lists package versions for a package owned by an organization.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "List package versions for a package owned by an organization"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"List package versions for a package owned by an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.

쿼리 매개 변수
이름, 유형, 설명
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." 기본값: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." 기본값: `30`
`state` string The state of the package, either active or deleted. 기본값: `active` 다음 중 하나일 수 있습니다.: `active`, `deleted`

HTTP response status codes for "List package versions for a package owned by an organization"

Status code	설명
`200`	OK
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "List package versions for a package owned by an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/orgs/{org}/packages/{package_type}/{package_name}/versions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200

[
  {
    "id": 245301,
    "name": "1.0.4",
    "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/245301",
    "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752",
    "created_at": "2019-11-05T22:49:04Z",
    "updated_at": "2019-11-05T22:49:04Z",
    "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.4",
    "metadata": {
      "package_type": "npm"
    }
  },
  {
    "id": 209672,
    "name": "1.0.3",
    "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/209672",
    "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752",
    "created_at": "2019-10-29T15:42:11Z",
    "updated_at": "2019-10-29T15:42:12Z",
    "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.3",
    "metadata": {
      "package_type": "npm"
    }
  }
]

Get a package version for an organization

Gets a specific package version in an organization.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Get a package version for an organization"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Get a package version for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Get a package version for an organization"

Status code	설명
`200`	OK

Code samples for "Get a package version for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200

{
  "id": 836,
  "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344",
  "url": "https://api.github.com/orgs/github/packages/container/hello_docker/versions/836",
  "package_html_url": "https://github.com/orgs/github/packages/container/package/hello_docker",
  "created_at": "2020-05-19T22:19:11Z",
  "updated_at": "2020-05-19T22:19:11Z",
  "html_url": "https://github.com/orgs/github/packages/container/hello_docker/836",
  "metadata": {
    "package_type": "container",
    "container": {
      "tags": [
        "latest"
      ]
    }
  }
}

Delete package version for an organization

Deletes a specific package version in an organization. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

The authenticated user must have admin permissions in the organization to use this endpoint. If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must also have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Delete package version for an organization"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Delete package version for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Delete package version for an organization"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Delete package version for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

delete/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for an organization

Restores a specific package version in an organization.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

The authenticated user must have admin permissions in the organization to use this endpoint. If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must also have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Restore package version for an organization"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Restore package version for an organization"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`org` string 필수 The organization name. The name is not case sensitive.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Restore package version for an organization"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Restore package version for an organization"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

post/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for authenticated-user

Lists all packages that are owned by the authenticated user within the user's namespace, and that encountered a conflict during a Docker migration.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint.

Fine-grained access tokens for "Get list of conflicting packages during Docker migration for authenticated-user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

HTTP response status codes for "Get list of conflicting packages during Docker migration for authenticated-user"

Status code	설명
`200`	OK

Code samples for "Get list of conflicting packages during Docker migration for authenticated-user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/user/docker/conflicts

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/docker/conflicts

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

List packages for the authenticated user's namespace

Lists packages owned by the authenticated user within the user's namespace.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "List packages for the authenticated user's namespace"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"List packages for the authenticated user's namespace"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

쿼리 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`visibility` string The selected visibility of the packages. This parameter is optional and only filters an existing result set. The `internal` visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems `internal` is synonymous with `private`. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages." 다음 중 하나일 수 있습니다.: `public`, `private`, `internal`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." 기본값: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." 기본값: `30`

HTTP response status codes for "List packages for the authenticated user's namespace"

Status code	설명
`200`	OK
`400`	The value of `per_page` multiplied by `page` cannot be greater than 10000.

Code samples for "List packages for the authenticated user's namespace"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/user/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  "https://api.github.com/user/packages?package_type=container"

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

Get a package for the authenticated user

Gets a specific package for a package owned by the authenticated user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Get a package for the authenticated user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Get a package for the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.

HTTP response status codes for "Get a package for the authenticated user"

Status code	설명
`200`	OK

Code samples for "Get a package for the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/user/packages/{package_type}/{package_name}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200

{
  "id": 40201,
  "name": "octo-name",
  "package_type": "rubygems",
  "owner": {
    "login": "octocat",
    "id": 209477,
    "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
    "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/octocat",
    "html_url": "https://github.com/octocat",
    "followers_url": "https://api.github.com/users/octocat/followers",
    "following_url": "https://api.github.com/users/octocat/following{/other_user}",
    "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
    "organizations_url": "https://api.github.com/users/octocat/orgs",
    "repos_url": "https://api.github.com/users/octocat/repos",
    "events_url": "https://api.github.com/users/octocat/events{/privacy}",
    "received_events_url": "https://api.github.com/users/octocat/received_events",
    "type": "User",
    "site_admin": true
  },
  "version_count": 3,
  "visibility": "public",
  "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name",
  "created_at": "2019-10-20T14:17:14Z",
  "updated_at": "2019-10-20T14:17:14Z",
  "repository": {
    "id": 216219492,
    "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=",
    "name": "octo-name-repo",
    "full_name": "octocat/octo-name-repo",
    "private": false,
    "owner": {
      "login": "octocat",
      "id": 209477,
      "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
      "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/octocat",
      "followers_url": "https://api.github.com/users/octocat/followers",
      "following_url": "https://api.github.com/users/octocat/following{/other_user}",
      "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
      "organizations_url": "https://api.github.com/users/octocat/orgs",
      "repos_url": "https://api.github.com/users/octocat/repos",
      "events_url": "https://api.github.com/users/octocat/events{/privacy}",
      "received_events_url": "https://api.github.com/users/octocat/received_events",
      "type": "User",
      "site_admin": true
    },
    "html_url": "https://github.com/octocat/octo-name-repo",
    "description": "Project for octocats",
    "fork": false,
    "url": "https://api.github.com/repos/octocat/octo-name-repo",
    "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks",
    "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}",
    "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}",
    "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams",
    "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks",
    "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}",
    "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events",
    "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}",
    "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}",
    "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags",
    "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}",
    "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}",
    "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}",
    "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}",
    "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}",
    "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages",
    "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers",
    "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors",
    "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers",
    "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription",
    "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}",
    "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}",
    "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}",
    "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}",
    "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}",
    "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}",
    "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges",
    "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}",
    "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads",
    "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}",
    "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}",
    "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}",
    "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}",
    "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}",
    "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}",
    "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments"
  },
  "html_url": "https://github.com/octocat/octo-name-repo/packages/40201"
}

Delete a package for the authenticated user

Deletes a package owned by the authenticated user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Delete a package for the authenticated user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Delete a package for the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.

HTTP response status codes for "Delete a package for the authenticated user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Delete a package for the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

delete/user/packages/{package_type}/{package_name}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for the authenticated user

Restores a package owned by the authenticated user.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Restore a package for the authenticated user"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Restore a package for the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.

쿼리 매개 변수
이름, 유형, 설명
`token` string package token

HTTP response status codes for "Restore a package for the authenticated user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Restore a package for the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

post/user/packages/{package_type}/{package_name}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by the authenticated user

Lists package versions for a package owned by the authenticated user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "List package versions for a package owned by the authenticated user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"List package versions for a package owned by the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.

쿼리 매개 변수
이름, 유형, 설명
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." 기본값: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." 기본값: `30`
`state` string The state of the package, either active or deleted. 기본값: `active` 다음 중 하나일 수 있습니다.: `active`, `deleted`

HTTP response status codes for "List package versions for a package owned by the authenticated user"

Status code	설명
`200`	OK
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "List package versions for a package owned by the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/user/packages/{package_type}/{package_name}/versions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200

[
  {
    "id": 45763,
    "name": "sha256:08a44bab0bddaddd8837a8b381aebc2e4b933768b981685a9e088360af0d3dd9",
    "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/45763",
    "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker",
    "created_at": "2020-09-11T21:56:40Z",
    "updated_at": "2021-02-05T21:32:32Z",
    "html_url": "https://github.com/users/octocat/packages/container/hello_docker/45763",
    "metadata": {
      "package_type": "container",
      "container": {
        "tags": [
          "latest"
        ]
      }
    }
  },
  {
    "id": 881,
    "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344",
    "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/881",
    "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker",
    "created_at": "2020-05-21T22:22:20Z",
    "updated_at": "2021-02-05T21:32:32Z",
    "html_url": "https://github.com/users/octocat/packages/container/hello_docker/881",
    "metadata": {
      "package_type": "container",
      "container": {
        "tags": []
      }
    }
  }
]

Get a package version for the authenticated user

Gets a specific package version for a package owned by the authenticated user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Get a package version for the authenticated user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Get a package version for the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Get a package version for the authenticated user"

Status code	설명
`200`	OK

Code samples for "Get a package version for the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/user/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200

{
  "id": 214,
  "name": "sha256:3561f0cff06caccddb99c93bd26e712fcc56a811de0f8ea7a17bb865f30b176a",
  "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/214",
  "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker",
  "created_at": "2020-05-15T03:46:45Z",
  "updated_at": "2020-05-15T03:46:45Z",
  "html_url": "https://github.com/users/octocat/packages/container/hello_docker/214",
  "metadata": {
    "package_type": "container",
    "container": {
      "tags": [
        "1.13.6"
      ]
    }
  }
}

Delete a package version for the authenticated user

Deletes a specific package version for a package owned by the authenticated user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

The authenticated user must have admin permissions in the organization to use this endpoint.

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Delete a package version for the authenticated user"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Delete a package version for the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Delete a package version for the authenticated user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Delete a package version for the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

delete/user/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore a package version for the authenticated user

Restores a package version owned by the authenticated user.

You can restore a deleted package version under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Restore a package version for the authenticated user"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Restore a package version for the authenticated user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Restore a package version for the authenticated user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Restore a package version for the authenticated user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

post/user/packages/{package_type}/{package_name}/versions/{package_version_id}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for user

Lists all packages that are in a specific user's namespace, that the requesting user has access to, and that encountered a conflict during Docker migration.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint.

Fine-grained access tokens for "Get list of conflicting packages during Docker migration for user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

This endpoint can be used without authentication if only public resources are requested.

"Get list of conflicting packages during Docker migration for user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`username` string 필수 The handle for the GitHub user account.

HTTP response status codes for "Get list of conflicting packages during Docker migration for user"

Status code	설명
`200`	OK
`401`	Requires authentication
`403`	Forbidden

Code samples for "Get list of conflicting packages during Docker migration for user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/users/{username}/docker/conflicts

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/docker/conflicts

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

List packages for a user

Lists all packages in a user's namespace for which the requesting user has access.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "List packages for a user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"List packages for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`username` string 필수 The handle for the GitHub user account.

쿼리 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`visibility` string The selected visibility of the packages. This parameter is optional and only filters an existing result set. The `internal` visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems `internal` is synonymous with `private`. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages." 다음 중 하나일 수 있습니다.: `public`, `private`, `internal`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." 기본값: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." 기본값: `30`

HTTP response status codes for "List packages for a user"

Status code	설명
`200`	OK
`400`	The value of `per_page` multiplied by `page` cannot be greater than 10000.
`401`	Requires authentication
`403`	Forbidden

Code samples for "List packages for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/users/{username}/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  "https://api.github.com/users/USERNAME/packages?package_type=container"

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

Get a package for a user

Gets a specific package metadata for a public package owned by a user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Get a package for a user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Get a package for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`username` string 필수 The handle for the GitHub user account.

HTTP response status codes for "Get a package for a user"

Status code	설명
`200`	OK

Code samples for "Get a package for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/users/{username}/packages/{package_type}/{package_name}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200

{
  "id": 40201,
  "name": "octo-name",
  "package_type": "rubygems",
  "owner": {
    "login": "octocat",
    "id": 209477,
    "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
    "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/octocat",
    "html_url": "https://github.com/octocat",
    "followers_url": "https://api.github.com/users/octocat/followers",
    "following_url": "https://api.github.com/users/octocat/following{/other_user}",
    "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
    "organizations_url": "https://api.github.com/users/octocat/orgs",
    "repos_url": "https://api.github.com/users/octocat/repos",
    "events_url": "https://api.github.com/users/octocat/events{/privacy}",
    "received_events_url": "https://api.github.com/users/octocat/received_events",
    "type": "User",
    "site_admin": true
  },
  "version_count": 3,
  "visibility": "public",
  "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name",
  "created_at": "2019-10-20T14:17:14Z",
  "updated_at": "2019-10-20T14:17:14Z",
  "repository": {
    "id": 216219492,
    "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=",
    "name": "octo-name-repo",
    "full_name": "octocat/octo-name-repo",
    "private": false,
    "owner": {
      "login": "octocat",
      "id": 209477,
      "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
      "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/octocat",
      "followers_url": "https://api.github.com/users/octocat/followers",
      "following_url": "https://api.github.com/users/octocat/following{/other_user}",
      "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
      "organizations_url": "https://api.github.com/users/octocat/orgs",
      "repos_url": "https://api.github.com/users/octocat/repos",
      "events_url": "https://api.github.com/users/octocat/events{/privacy}",
      "received_events_url": "https://api.github.com/users/octocat/received_events",
      "type": "User",
      "site_admin": true
    },
    "html_url": "https://github.com/octocat/octo-name-repo",
    "description": "Project for octocats",
    "fork": false,
    "url": "https://api.github.com/repos/octocat/octo-name-repo",
    "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks",
    "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}",
    "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}",
    "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams",
    "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks",
    "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}",
    "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events",
    "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}",
    "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}",
    "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags",
    "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}",
    "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}",
    "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}",
    "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}",
    "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}",
    "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages",
    "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers",
    "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors",
    "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers",
    "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription",
    "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}",
    "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}",
    "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}",
    "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}",
    "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}",
    "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}",
    "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges",
    "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}",
    "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads",
    "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}",
    "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}",
    "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}",
    "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}",
    "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}",
    "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}",
    "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments"
  },
  "html_url": "https://github.com/octocat/octo-name-repo/packages/40201"
}

Delete a package for a user

Deletes an entire package for a user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Delete a package for a user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Delete a package for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`username` string 필수 The handle for the GitHub user account.

HTTP response status codes for "Delete a package for a user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Delete a package for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

delete/users/{username}/packages/{package_type}/{package_name}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for a user

Restores an entire package for a user.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Restore a package for a user"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Restore a package for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`username` string 필수 The handle for the GitHub user account.

쿼리 매개 변수
이름, 유형, 설명
`token` string package token

HTTP response status codes for "Restore a package for a user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Restore a package for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

post/users/{username}/packages/{package_type}/{package_name}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by a user

Lists package versions for a public package owned by a specified user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "List package versions for a package owned by a user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"List package versions for a package owned by a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`username` string 필수 The handle for the GitHub user account.

HTTP response status codes for "List package versions for a package owned by a user"

Status code	설명
`200`	OK
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "List package versions for a package owned by a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/users/{username}/packages/{package_type}/{package_name}/versions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200

[
  {
    "id": 3497268,
    "name": "0.3.0",
    "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/3497268",
    "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
    "license": "MIT",
    "created_at": "2020-08-31T15:22:11Z",
    "updated_at": "2020-08-31T15:22:12Z",
    "description": "Project for octocats",
    "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.3.0",
    "metadata": {
      "package_type": "rubygems"
    }
  },
  {
    "id": 387039,
    "name": "0.2.0",
    "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039",
    "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
    "license": "MIT",
    "created_at": "2019-12-01T20:49:29Z",
    "updated_at": "2019-12-01T20:49:30Z",
    "description": "Project for octocats",
    "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0",
    "metadata": {
      "package_type": "rubygems"
    }
  },
  {
    "id": 169770,
    "name": "0.1.0",
    "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/169770",
    "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
    "license": "MIT",
    "created_at": "2019-10-20T14:17:14Z",
    "updated_at": "2019-10-20T14:17:15Z",
    "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.1.0",
    "metadata": {
      "package_type": "rubygems"
    }
  }
]

Get a package version for a user

Gets a specific package version for a public package owned by a specified user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Get a package version for a user"

This endpoint works with the following fine-grained token types:

The fine-grained token does not require any permissions.

"Get a package version for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`package_version_id` integer 필수 Unique identifier of the package version.
`username` string 필수 The handle for the GitHub user account.

HTTP response status codes for "Get a package version for a user"

Status code	설명
`200`	OK

Code samples for "Get a package version for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

get/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200

{
  "id": 387039,
  "name": "0.2.0",
  "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039",
  "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
  "license": "MIT",
  "created_at": "2019-12-01T20:49:29Z",
  "updated_at": "2019-12-01T20:49:30Z",
  "description": "Octo-name client for Ruby",
  "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0",
  "metadata": {
    "package_type": "rubygems"
  }
}

Delete package version for a user

Deletes a specific package version for a user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Delete package version for a user"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Delete package version for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`username` string 필수 The handle for the GitHub user account.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Delete package version for a user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Delete package version for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

delete/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for a user

Restores a specific package version for a user.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Fine-grained access tokens for "Restore package version for a user"

This endpoint works with the following fine-grained token types:

GitHub App installation access tokens

The fine-grained token does not require any permissions.

"Restore package version for a user"에 대한 매개 변수

머리글
이름, 유형, 설명
`accept` string Setting to `application/vnd.github+json` is recommended.

경로 매개 변수
이름, 유형, 설명
`package_type` string 필수 The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. 다음 중 하나일 수 있습니다.: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string 필수 The name of the package.
`username` string 필수 The handle for the GitHub user account.
`package_version_id` integer 필수 Unique identifier of the package version.

HTTP response status codes for "Restore package version for a user"

Status code	설명
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Code samples for "Restore package version for a user"

If you access GitHub at GHE.com, replace api.github.com with your enterprise's dedicated subdomain at api.SUBDOMAIN.ghe.com.

Request example

post/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "X-GitHub-Api-Version: 2026-03-10" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204