管理コンソール用の REST API エンドポイント

[Management Console]について

管理コンソールへの API 呼び出しを行うときは、ポート番号を明示的に設定する必要があります。エンタープライズで TLS が有効になっている場合、ポート番号は 8443 です。それ以外の場合、ポート番号は 8080 です。

ポート番号を提供できない場合は、自動的にリダイレクトに従うようにツールを構成する必要があります。

また、GitHub Enterprise Server では、独自の TLS 証明書を追加する前は自己署名証明書が使われるため、curl を使うとき、場合によっては -k フラグを追加する必要があります。

ルートサイト管理者としての認証

「Create a GitHub license」を除く、このカテゴリのすべてのエンドポイントにルートサイト管理者のパスワードを渡す必要があります。

各要求でこのトークンを送るには、api_key パラメーターを使います。たとえば、次のような点です。

curl -L 'https://HOSTNAME:ADMIN-PORT/setup/api?api_key=YOUR_PASSWORD'

標準の HTTP 認証を使用してこのトークンを送信することもできます。次に例を示します。

curl -L -u "api_key:YOUR_PASSWORD" 'https://HOSTNAME:ADMIN-PORT/setup/api'

[Management Console] ユーザーとしての認証

Management Console のユーザーアカウントで、このエンドポイントにアクセスするための認証を行うこともできます。

[Management Console] ユーザーアカウントのパスワードを使って認証を行うには、標準の HTTP 認証を使います。次の例では、YOUR_USER_NAME と YOUR_PASSWORD をアカウントのユーザー名とパスワードに置き換えます。

curl -L -u "YOUR_USER_NAME:YOUR_PASSWORD" 'https://HOSTNAME:ADMIN-PORT/setup/api'

Get the configuration status

This endpoint allows you to check the status of the most recent configuration process:

Note that you may need to wait several seconds after you start a process before you can check its status.

The different statuses are:

Status	Description
`PENDING`	The job has not started yet
`CONFIGURING`	The job is running
`DONE`	The job has finished correctly
`FAILED`	The job has finished unexpectedly

"Get the configuration status" の HTTP 応答状態コード

状態コード	説明
`200`	OK
`401`	Unauthorized

"Get the configuration status" のコードサンプル

要求の例

get/setup/api/configcheck

curl -L \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/configcheck

Response

Status: 200

{
  "status": "running",
  "progress": [
    {
      "status": "DONE",
      "key": "Appliance core components"
    },
    {
      "status": "DONE",
      "key": "GitHub utilities"
    },
    {
      "status": "DONE",
      "key": "GitHub applications"
    },
    {
      "status": "CONFIGURING",
      "key": "GitHub services"
    },
    {
      "status": "PENDING",
      "key": "Reloading appliance services"
    }
  ]
}

Start a configuration process

This endpoint allows you to start a configuration process at any time for your updated settings to take effect:

"Start a configuration process" の HTTP 応答状態コード

状態コード	説明
`202`	Accepted
`401`	Unauthorized

"Start a configuration process" のコードサンプル

要求の例

post/setup/api/configure

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/configure

Response

Status: 202

Get the maintenance status

Check your installation's maintenance status:

"Get the maintenance status" の HTTP 応答状態コード

状態コード	説明
`200`	OK
`401`	Unauthorized

"Get the maintenance status" のコードサンプル

要求の例

get/setup/api/maintenance

curl -L \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/maintenance

Response

Status: 200

{
  "status": "scheduled",
  "scheduled_time": "Tuesday, January 22 at 15:34 -0800",
  "connection_services": [
    {
      "name": "git operations",
      "number": 0
    },
    {
      "name": "mysql queries",
      "number": 233
    },
    {
      "name": "aqueduct jobs",
      "number": 34
    },
    {
      "name": "resque jobs",
      "number": 54
    }
  ]
}

Enable or disable maintenance mode

Note: The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.

"Enable or disable maintenance mode" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

本文のパラメーター
名前, Type, 説明
`maintenance` string 必須 A JSON string with the attributes `enabled` and `when`. The possible values for `enabled` are `true` and `false`. When it's `false`, the attribute `when` is ignored and the maintenance mode is turned off. `when` defines the time period when the maintenance was enabled. The possible values for `when` are `now` or any date parseable by mojombo/chronic.

"Enable or disable maintenance mode" の HTTP 応答状態コード

状態コード	説明
`200`	OK
`401`	Unauthorized

"Enable or disable maintenance mode" のコードサンプル

要求の例

post/setup/api/maintenance

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/maintenance \
   --data-urlencode 'maintenance={"enabled":true, "when":"now"}'

Response

Status: 200

{
  "status": "scheduled",
  "scheduled_time": "Tuesday, January 22 at 15:34 -0800",
  "connection_services": [
    {
      "name": "git operations",
      "number": 0
    },
    {
      "name": "mysql queries",
      "number": 233
    },
    {
      "name": "aqueduct jobs",
      "number": 34
    },
    {
      "name": "resque jobs",
      "number": 54
    }
  ]
}

Get settings

Gets the settings for your instance. To change settings, see the Set settings endpoint.

Note: You cannot retrieve the management console password with the Enterprise administration API.

"Get settings" の HTTP 応答状態コード

状態コード	説明
`200`	OK
`401`	Unauthorized

"Get settings" のコードサンプル

要求の例

get/setup/api/settings

curl -L \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/settings

Response

Status: 200

{
  "enterprise": {
    "private_mode": false,
    "public_pages": false,
    "subdomain_isolation": true,
    "signup_enabled": false,
    "github_hostname": "ghe.local",
    "identicons_host": "dotcom",
    "http_proxy": null,
    "auth_mode": "default",
    "expire_sessions": false,
    "admin_password": null,
    "configuration_id": 1401777404,
    "configuration_run_count": 4,
    "avatar": {
      "enabled": false,
      "uri": ""
    },
    "customer": {
      "name": "GitHub",
      "email": "stannis@themannis.biz",
      "uuid": "af6cac80-e4e1-012e-d822-1231380e52e9",
      "secret_key_data": "-----BEGIN PGP PRIVATE KEY BLOCK-----\nVersion: GnuPG v1.4.10 (GNU/Linux)\n\nlQcYBE5TCgsBEACk4yHpUcapplebaumBMXYMiLF+nCQ0lxpx...\n-----END PGP PRIVATE KEY BLOCK-----\n",
      "public_key_data": "-----BEGIN PGP PUBLIC KEY BLOCK-----\nVersion: GnuPG v1.4.10 (GNU/Linux)\n\nmI0ETqzZYgEEALSe6snowdenXyqvLfSQ34HWD6C7....\n-----END PGP PUBLIC KEY BLOCK-----\n"
    },
    "license": {
      "seats": 0,
      "evaluation": false,
      "perpetual": false,
      "unlimited_seating": true,
      "support_key": "ssh-rsa AAAAB3N....",
      "ssh_allowed": true,
      "cluster_support": false,
      "expire_at": "2016-04-27T00:00:00-07:00"
    },
    "github_ssl": {
      "enabled": false,
      "cert": null,
      "key": null
    },
    "ldap": {
      "host": null,
      "port": 0,
      "base": [],
      "uid": null,
      "bind_dn": null,
      "password": null,
      "method": "Plain",
      "search_strategy": "detect",
      "user_groups": [],
      "admin_group": null,
      "virtual_attribute_enabled": false,
      "recursive_group_search": false,
      "posix_support": true,
      "user_sync_emails": false,
      "user_sync_keys": false,
      "user_sync_interval": 4,
      "team_sync_interval": 4,
      "sync_enabled": false,
      "reconciliation": {
        "user": null,
        "org": null
      },
      "profile": {
        "uid": "uid",
        "name": null,
        "mail": null,
        "key": null
      }
    },
    "cas": {
      "url": null
    },
    "saml": {
      "sso_url": null,
      "certificate": null,
      "certificate_path": null,
      "issuer": null,
      "idp_initiated_sso": false,
      "disable_admin_demote": false
    },
    "github_oauth": {
      "client_id": "12313412",
      "client_secret": "kj123131132",
      "organization_name": "Homestar Runners",
      "organization_team": "homestarrunners/characters"
    },
    "smtp": {
      "enabled": true,
      "address": "smtp.example.com",
      "authentication": "plain",
      "port": "1234",
      "domain": "blah",
      "username": "foo",
      "user_name": "mr_foo",
      "enable_starttls_auto": true,
      "password": "bar",
      "discard-to-noreply-address": true,
      "support_address": "enterprise@github.com",
      "support_address_type": "email",
      "noreply_address": "noreply@github.com"
    },
    "ntp": {
      "primary_server": "0.pool.ntp.org",
      "secondary_server": "1.pool.ntp.org"
    },
    "timezone": null,
    "snmp": {
      "enabled": false,
      "community": ""
    },
    "syslog": {
      "enabled": false,
      "server": null,
      "protocol_name": "udp"
    },
    "assets": null,
    "pages": {
      "enabled": true
    },
    "collectd": {
      "enabled": false,
      "server": null,
      "port": 0,
      "encryption": null,
      "username": null,
      "password": null
    },
    "mapping": {
      "enabled": true,
      "tileserver": null,
      "basemap": "company.map-qsz2zrvs",
      "token": null
    },
    "load_balancer": null
  },
  "run_list": [
    "recipe[enterprise-configure]"
  ]
}

Set settings

Applies settings on your instance. For a list of the available settings, see the Get settings endpoint.

Notes:

The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.
You cannot set the management console password with the Enterprise administration API. Use the ghe-set-password utility to change the management console password. For more information, see "Command-line utilities."

"Set settings" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

本文のパラメーター
名前, Type, 説明
`settings` string 必須 A JSON string with the new settings. Note that you only need to pass the specific settings you want to modify. For a list of the available settings, see the Get settings endpoint.

"Set settings" の HTTP 応答状態コード

状態コード	説明
`204`	No Content
`401`	Unauthorized

"Set settings" のコードサンプル

要求の例

put/setup/api/settings

curl -L \
  -X PUT \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/settings \
   --data-urlencode 'settings={ "enterprise": { "public_pages": true }}'

Response

Status: 204

Get all authorized SSH keys

"Get all authorized SSH keys" の HTTP 応答状態コード

状態コード	説明
`200`	OK
`401`	Unauthorized

"Get all authorized SSH keys" のコードサンプル

要求の例

get/setup/api/settings/authorized-keys

curl -L \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/settings/authorized-keys

Response

Status: 200

[
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  },
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  },
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  }
]

Add an authorized SSH key

Note: The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.

"Add an authorized SSH key" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

本文のパラメーター
名前, Type, 説明
`authorized_key` string 必須 The public SSH key.

"Add an authorized SSH key" の HTTP 応答状態コード

状態コード	説明
`201`	Created
`401`	Unauthorized

"Add an authorized SSH key" のコードサンプル

要求の例

post/setup/api/settings/authorized-keys

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/settings/authorized-keys \
   --data-urlencode 'authorized_key=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQCssTL/Vtu/ODLTj0VtZoRAbvf7uiv5997GyDq0MoAZUjb5jmA5wYe2/wF6sFuhiZTnZoF1ZtCHunPp0hM/GHrn6VySBhNncx14YO8FPt1CIhEeRMSEjUK9cY3xAbS365oXY8vnUHJsS9+1tr/2bx/+4NJfcUt/Ezf1OR/0LStQXw=='

Response

Status: 201

[
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  },
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  },
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  }
]

Remove an authorized SSH key

Note: The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.

"Remove an authorized SSH key" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

本文のパラメーター
名前, Type, 説明
`authorized_key` string 必須 The public SSH key.

"Remove an authorized SSH key" の HTTP 応答状態コード

状態コード	説明
`200`	OK
`401`	Unauthorized

"Remove an authorized SSH key" のコードサンプル

要求の例

delete/setup/api/settings/authorized-keys

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/settings/authorized-keys \
   --data-urlencode 'authorized_key=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQCssTL/Vtu/ODLTj0VtZoRAbvf7uiv5997GyDq0MoAZUjb5jmA5wYe2/wF6sFuhiZTnZoF1ZtCHunPp0hM/GHrn6VySBhNncx14YO8FPt1CIhEeRMSEjUK9cY3xAbS365oXY8vnUHJsS9+1tr/2bx/+4NJfcUt/Ezf1OR/0LStQXw=='

Response

Status: 200

[
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  },
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  },
  {
    "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...",
    "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64"
  }
]

Create a GitHub license

When you boot a GitHub instance for the first time, you can use the following endpoint to upload a license.

Note that you need to POST to /setup/api/configure to start the actual configuration process.

When using this endpoint, your GitHub instance must have a password set. This can be accomplished two ways:

If you're working directly with the API before accessing the web interface, you must pass in the password parameter to set your password.
If you set up your instance via the web interface before accessing the API, your calls to this endpoint do not need the password parameter.

Note: The request body for this operation must be submitted as multipart/form-data data. You can can reference the license file by prefixing the filename with the @ symbol using curl. For more information, see the curl documentation.

"Create a GitHub license" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

本文のパラメーター
名前, Type, 説明
`license` string 必須 The content of your .ghl license file.
`password` string You must provide a password only if you are uploading your license for the first time. If you previously set a password through the web interface, you don't need this parameter.
`settings` string An optional JSON string containing the installation settings. For a list of the available settings, see the Get settings endpoint.

"Create a GitHub license" の HTTP 応答状態コード

状態コード	説明
`202`	Accepted
`401`	Unauthorized

"Create a GitHub license" のコードサンプル

要求の例

post/setup/api/start

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/start \
   --form 'license=@enterprise.ghl' --form 'password=secret'

Response

Status: 202

Upgrade a license

This API upgrades your license and also triggers the configuration process.

Note: The request body for this operation must be submitted as multipart/form-data data. You can can reference the license file by prefixing the filename with the @ symbol using curl. For more information, see the curl documentation.

"Upgrade a license" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

本文のパラメーター
名前, Type, 説明
`license` string The content of your new .ghl license file.

"Upgrade a license" の HTTP 応答状態コード

状態コード	説明
`202`	Accepted
`401`	Unauthorized

"Upgrade a license" のコードサンプル

要求の例

post/setup/api/upgrade

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -u "api_key:your-password" \
  http(s)://HOSTNAME/setup/api/upgrade \
   --form 'license=@enterprise.ghl'

Response

Status: 202