Skip to main content
L’API REST est maintenant versionnée. Pour plus d’informations, consultez « À propos des versions de l’API ».

Paquets

Utilisez l’API REST pour interagir avec GitHub Packages.

À propos de GitHub Packages

GitHub Packages prend en charge une plage de gestionnaires de packages pour la publication de packages. Pour plus d’informations, consultez « Présentation de GitHub Packages ».

Après publication d’un package, vous pouvez utiliser l’API REST pour gérer les packages dans vos référentiels et organisations GitHub. Pour plus d’informations, consultez « Suppression et restauration d’un package ».

Pour utiliser l’API REST afin de gérer GitHub Packages, vous devez vous authentifier avec un personal access token (classic).

  • Pour accéder aux métadonnées de package, votre jeton doit avoir l’étendue read:packages.
  • Pour supprimer des packages et des versions de package, votre jeton doit avoir les étendues read:packages et delete:packages.
  • Pour restaurer des packages et des versions de package, votre jeton doit avoir les étendues read:packages et write:packages.

Si votre package se trouve dans un registre qui prend en charge les autorisations granulaires, votre jeton n’a pas besoin de l’étendue repo pour accéder ou gérer ce package. Si votre package se trouve dans un registre qui prend en charge uniquement les autorisations limitées au dépôt, votre jeton doit aussi inclure l’étendue repo dans la mesure où votre package hérite des autorisations d’un dépôt GitHub. Pour obtenir la liste des registres qui prennent en charge uniquement les autorisations limitées au dépôt, consultez « À propos des autorisations pour les packages GitHub ».

Get list of conflicting packages during Docker migration for organization

Lists all packages that are in a specific organization, are readable by the requesting user, and that encountered a conflict during a Docker migration. To use this endpoint, you must authenticate using an access token with the read:packages scope.

Paramètres pour « Get list of conflicting packages during Docker migration for organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
org string Obligatoire

The organization name. The name is not case sensitive.

Codes d’état de la réponse HTTP pour « Get list of conflicting packages during Docker migration for organization »

Code d’étatDescription
200

OK

401

Requires authentication

403

Forbidden

Exemples de code pour « Get list of conflicting packages during Docker migration for organization »

get/orgs/{org}/docker/conflicts
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/docker/conflicts

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker" } ]

List packages for an organization

Lists packages in an organization readable by the user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « List packages for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
org string Obligatoire

The organization name. The name is not case sensitive.

Paramètres de requête
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

visibility string

The selected visibility of the packages. This parameter is optional and only filters an existing result set.

The internal visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems internal is synonymous with private. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages."

Peut être: public, private, internal

page integer

Page number of the results to fetch.

Default: 1

per_page integer

The number of results per page (max 100).

Default: 30

Codes d’état de la réponse HTTP pour « List packages for an organization »

Code d’étatDescription
200

OK

400

The value of per_page multiplied by page cannot be greater than 10000.

401

Requires authentication

403

Forbidden

Exemples de code pour « List packages for an organization »

get/orgs/{org}/packages
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ "https://api.github.com/orgs/ORG/packages?package_type=container"

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker" } ]

Get a package for an organization

Gets a specific package in an organization.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Get a package for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

Codes d’état de la réponse HTTP pour « Get a package for an organization »

Code d’étatDescription
200

OK

Exemples de code pour « Get a package for an organization »

get/orgs/{org}/packages/{package_type}/{package_name}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200
{ "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }

Delete a package for an organization

Deletes an entire package in an organization. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Delete a package for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

Codes d’état de la réponse HTTP pour « Delete a package for an organization »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Delete a package for an organization »

delete/orgs/{org}/packages/{package_type}/{package_name}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for an organization

Restores an entire package in an organization.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Restore a package for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

Paramètres de requête
Nom, Type, Description
token string

package token

Codes d’état de la réponse HTTP pour « Restore a package for an organization »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Restore a package for an organization »

post/orgs/{org}/packages/{package_type}/{package_name}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by an organization

Lists package versions for a package owned by an organization.

If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « List package versions for a package owned by an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

Paramètres de requête
Nom, Type, Description
page integer

Page number of the results to fetch.

Default: 1

per_page integer

The number of results per page (max 100).

Default: 30

state string

The state of the package, either active or deleted.

Default: active

Peut être: active, deleted

Codes d’état de la réponse HTTP pour « List package versions for a package owned by an organization »

Code d’étatDescription
200

OK

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « List package versions for a package owned by an organization »

get/orgs/{org}/packages/{package_type}/{package_name}/versions
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200
[ { "id": 245301, "name": "1.0.4", "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/245301", "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752", "created_at": "2019-11-05T22:49:04Z", "updated_at": "2019-11-05T22:49:04Z", "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.4", "metadata": { "package_type": "npm" } }, { "id": 209672, "name": "1.0.3", "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/209672", "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752", "created_at": "2019-10-29T15:42:11Z", "updated_at": "2019-10-29T15:42:12Z", "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.3", "metadata": { "package_type": "npm" } } ]

Get a package version for an organization

Gets a specific package version in an organization.

You must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Get a package version for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Get a package version for an organization »

Code d’étatDescription
200

OK

Exemples de code pour « Get a package version for an organization »

get/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200
{ "id": 836, "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344", "url": "https://api.github.com/orgs/github/packages/container/hello_docker/versions/836", "package_html_url": "https://github.com/orgs/github/packages/container/package/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/hello_docker/836", "metadata": { "package_type": "container", "container": { "tags": [ "latest" ] } } }

Delete package version for an organization

Deletes a specific package version in an organization. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Delete package version for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Delete package version for an organization »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Delete package version for an organization »

delete/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for an organization

Restores a specific package version in an organization.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Restore package version for an organization »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

org string Obligatoire

The organization name. The name is not case sensitive.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Restore package version for an organization »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Restore package version for an organization »

post/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for authenticated-user

Lists all packages that are owned by the authenticated user within the user's namespace, and that encountered a conflict during a Docker migration. To use this endpoint, you must authenticate using an access token with the read:packages scope.

Codes d’état de la réponse HTTP pour « Get list of conflicting packages during Docker migration for authenticated-user »

Code d’étatDescription
200

OK

Exemples de code pour « Get list of conflicting packages during Docker migration for authenticated-user »

get/user/docker/conflicts
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/docker/conflicts

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

List packages for the authenticated user's namespace

Lists packages owned by the authenticated user within the user's namespace.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « List packages for the authenticated user's namespace »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de requête
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

visibility string

The selected visibility of the packages. This parameter is optional and only filters an existing result set.

The internal visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems internal is synonymous with private. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages."

Peut être: public, private, internal

page integer

Page number of the results to fetch.

Default: 1

per_page integer

The number of results per page (max 100).

Default: 30

Codes d’état de la réponse HTTP pour « List packages for the authenticated user's namespace »

Code d’étatDescription
200

OK

400

The value of per_page multiplied by page cannot be greater than 10000.

Exemples de code pour « List packages for the authenticated user's namespace »

get/user/packages
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ "https://api.github.com/user/packages?package_type=container"

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

Get a package for the authenticated user

Gets a specific package for a package owned by the authenticated user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Get a package for the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

Codes d’état de la réponse HTTP pour « Get a package for the authenticated user »

Code d’étatDescription
200

OK

Exemples de code pour « Get a package for the authenticated user »

get/user/packages/{package_type}/{package_name}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200
{ "id": 40201, "name": "octo-name", "package_type": "rubygems", "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "version_count": 3, "visibility": "public", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name", "created_at": "2019-10-20T14:17:14Z", "updated_at": "2019-10-20T14:17:14Z", "repository": { "id": 216219492, "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=", "name": "octo-name-repo", "full_name": "octocat/octo-name-repo", "private": false, "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "html_url": "https://github.com/octocat/octo-name-repo", "description": "Project for octocats", "fork": false, "url": "https://api.github.com/repos/octocat/octo-name-repo", "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks", "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}", "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}", "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams", "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks", "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}", "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events", "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}", "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}", "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags", "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}", "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}", "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}", "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}", "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}", "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages", "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers", "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors", "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers", "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription", "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}", "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}", "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}", "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}", "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}", "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}", "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges", "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}", "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads", "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}", "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}", "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}", "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}", "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}", "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}", "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments" }, "html_url": "https://github.com/octocat/octo-name-repo/packages/40201" }

Delete a package for the authenticated user

Deletes a package owned by the authenticated user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must authenticate using an access token with the read:packages and delete:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Delete a package for the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

Codes d’état de la réponse HTTP pour « Delete a package for the authenticated user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Delete a package for the authenticated user »

delete/user/packages/{package_type}/{package_name}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for the authenticated user

Restores a package owned by the authenticated user.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Restore a package for the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

Paramètres de requête
Nom, Type, Description
token string

package token

Codes d’état de la réponse HTTP pour « Restore a package for the authenticated user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Restore a package for the authenticated user »

post/user/packages/{package_type}/{package_name}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by the authenticated user

Lists package versions for a package owned by the authenticated user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « List package versions for a package owned by the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

Paramètres de requête
Nom, Type, Description
page integer

Page number of the results to fetch.

Default: 1

per_page integer

The number of results per page (max 100).

Default: 30

state string

The state of the package, either active or deleted.

Default: active

Peut être: active, deleted

Codes d’état de la réponse HTTP pour « List package versions for a package owned by the authenticated user »

Code d’étatDescription
200

OK

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « List package versions for a package owned by the authenticated user »

get/user/packages/{package_type}/{package_name}/versions
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200
[ { "id": 45763, "name": "sha256:08a44bab0bddaddd8837a8b381aebc2e4b933768b981685a9e088360af0d3dd9", "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/45763", "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker", "created_at": "2020-09-11T21:56:40Z", "updated_at": "2021-02-05T21:32:32Z", "html_url": "https://github.com/users/octocat/packages/container/hello_docker/45763", "metadata": { "package_type": "container", "container": { "tags": [ "latest" ] } } }, { "id": 881, "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344", "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/881", "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker", "created_at": "2020-05-21T22:22:20Z", "updated_at": "2021-02-05T21:32:32Z", "html_url": "https://github.com/users/octocat/packages/container/hello_docker/881", "metadata": { "package_type": "container", "container": { "tags": [] } } } ]

Get a package version for the authenticated user

Gets a specific package version for a package owned by the authenticated user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Get a package version for the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Get a package version for the authenticated user »

Code d’étatDescription
200

OK

Exemples de code pour « Get a package version for the authenticated user »

get/user/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200
{ "id": 214, "name": "sha256:3561f0cff06caccddb99c93bd26e712fcc56a811de0f8ea7a17bb865f30b176a", "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/214", "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker", "created_at": "2020-05-15T03:46:45Z", "updated_at": "2020-05-15T03:46:45Z", "html_url": "https://github.com/users/octocat/packages/container/hello_docker/214", "metadata": { "package_type": "container", "container": { "tags": [ "1.13.6" ] } } }

Delete a package version for the authenticated user

Deletes a specific package version for a package owned by the authenticated user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and delete:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Delete a package version for the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Delete a package version for the authenticated user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Delete a package version for the authenticated user »

delete/user/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore a package version for the authenticated user

Restores a package version owned by the authenticated user.

You can restore a deleted package version under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Restore a package version for the authenticated user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Restore a package version for the authenticated user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Restore a package version for the authenticated user »

post/user/packages/{package_type}/{package_name}/versions/{package_version_id}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for user

Lists all packages that are in a specific user's namespace, that the requesting user has access to, and that encountered a conflict during Docker migration. To use this endpoint, you must authenticate using an access token with the read:packages scope.

Paramètres pour « Get list of conflicting packages during Docker migration for user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
username string Obligatoire

The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Get list of conflicting packages during Docker migration for user »

Code d’étatDescription
200

OK

401

Requires authentication

403

Forbidden

Exemples de code pour « Get list of conflicting packages during Docker migration for user »

get/users/{username}/docker/conflicts
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/docker/conflicts

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

List packages for a user

Lists all packages in a user's namespace for which the requesting user has access.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « List packages for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
username string Obligatoire

The handle for the GitHub user account.

Paramètres de requête
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

visibility string

The selected visibility of the packages. This parameter is optional and only filters an existing result set.

The internal visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems internal is synonymous with private. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages."

Peut être: public, private, internal

page integer

Page number of the results to fetch.

Default: 1

per_page integer

The number of results per page (max 100).

Default: 30

Codes d’état de la réponse HTTP pour « List packages for a user »

Code d’étatDescription
200

OK

400

The value of per_page multiplied by page cannot be greater than 10000.

401

Requires authentication

403

Forbidden

Exemples de code pour « List packages for a user »

get/users/{username}/packages
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ "https://api.github.com/users/USERNAME/packages?package_type=container"

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

Get a package for a user

Gets a specific package metadata for a public package owned by a user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Get a package for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

username string Obligatoire

The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Get a package for a user »

Code d’étatDescription
200

OK

Exemples de code pour « Get a package for a user »

get/users/{username}/packages/{package_type}/{package_name}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200
{ "id": 40201, "name": "octo-name", "package_type": "rubygems", "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "version_count": 3, "visibility": "public", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name", "created_at": "2019-10-20T14:17:14Z", "updated_at": "2019-10-20T14:17:14Z", "repository": { "id": 216219492, "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=", "name": "octo-name-repo", "full_name": "octocat/octo-name-repo", "private": false, "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "html_url": "https://github.com/octocat/octo-name-repo", "description": "Project for octocats", "fork": false, "url": "https://api.github.com/repos/octocat/octo-name-repo", "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks", "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}", "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}", "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams", "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks", "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}", "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events", "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}", "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}", "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags", "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}", "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}", "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}", "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}", "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}", "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages", "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers", "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors", "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers", "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription", "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}", "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}", "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}", "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}", "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}", "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}", "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges", "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}", "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads", "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}", "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}", "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}", "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}", "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}", "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}", "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments" }, "html_url": "https://github.com/octocat/octo-name-repo/packages/40201" }

Delete a package for a user

Deletes an entire package for a user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Delete a package for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

username string Obligatoire

The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Delete a package for a user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Delete a package for a user »

delete/users/{username}/packages/{package_type}/{package_name}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for a user

Restores an entire package for a user.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Restore a package for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

username string Obligatoire

The handle for the GitHub user account.

Paramètres de requête
Nom, Type, Description
token string

package token

Codes d’état de la réponse HTTP pour « Restore a package for a user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Restore a package for a user »

post/users/{username}/packages/{package_type}/{package_name}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by a user

Lists package versions for a public package owned by a specified user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « List package versions for a package owned by a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

username string Obligatoire

The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « List package versions for a package owned by a user »

Code d’étatDescription
200

OK

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « List package versions for a package owned by a user »

get/users/{username}/packages/{package_type}/{package_name}/versions
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200
[ { "id": 3497268, "name": "0.3.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/3497268", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2020-08-31T15:22:11Z", "updated_at": "2020-08-31T15:22:12Z", "description": "Project for octocats", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.3.0", "metadata": { "package_type": "rubygems" } }, { "id": 387039, "name": "0.2.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2019-12-01T20:49:29Z", "updated_at": "2019-12-01T20:49:30Z", "description": "Project for octocats", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0", "metadata": { "package_type": "rubygems" } }, { "id": 169770, "name": "0.1.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/169770", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2019-10-20T14:17:14Z", "updated_at": "2019-10-20T14:17:15Z", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.1.0", "metadata": { "package_type": "rubygems" } } ]

Get a package version for a user

Gets a specific package version for a public package owned by a specified user.

At this time, to use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Paramètres pour « Get a package version for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

package_version_id integer Obligatoire

Unique identifier of the package version.

username string Obligatoire

The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Get a package version for a user »

Code d’étatDescription
200

OK

Exemples de code pour « Get a package version for a user »

get/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200
{ "id": 387039, "name": "0.2.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2019-12-01T20:49:29Z", "updated_at": "2019-12-01T20:49:30Z", "description": "Octo-name client for Ruby", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0", "metadata": { "package_type": "rubygems" } }

Delete package version for a user

Deletes a specific package version for a user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Delete package version for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

username string Obligatoire

The handle for the GitHub user account.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Delete package version for a user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Delete package version for a user »

delete/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for a user

Restores a specific package version for a user.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Paramètres pour « Restore package version for a user »

En-têtes
Nom, Type, Description
accept string

Setting to application/vnd.github+json is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
package_type string Obligatoire

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Peut être: npm, maven, rubygems, docker, nuget, container

package_name string Obligatoire

The name of the package.

username string Obligatoire

The handle for the GitHub user account.

package_version_id integer Obligatoire

Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Restore package version for a user »

Code d’étatDescription
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Exemples de code pour « Restore package version for a user »

post/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204