Skip to main content

Эта версия GitHub Enterprise Server была прекращена 2024-03-26. Исправления выпускаться не будут даже при критических проблемах безопасности. Для повышения производительности, повышения безопасности и новых функций выполните обновление до последней версии GitHub Enterprise Server. Чтобы получить справку по обновлению, обратитесь в службу поддержки GitHub Enterprise.

После обновления экземпляра Enterprise Server администратором сайта до Enterprise Server 3.9 или более поздней версии, REST API будет версии. Сведения о том, как найти версию экземпляра, см. в разделе "Сведения о версиях документов GitHub". Дополнительные сведения см. в разделе "О управлении версиями API".

Конечные точки REST API для консоли управления

Используйте REST API для управления установкой GitHub Enterprise Server.

About the Management Console

You should explicitly set the port number when making API calls to the Management Console. If TLS is enabled on your enterprise, the port number is 8443. Otherwise, the port number is 8080.

If you cannot provide a port number, you'll need to configure your tool to automatically follow redirects.

You may also need to add the -k flag when using curl, since GitHub Enterprise Server uses a self-signed certificate before you add your own TLS certificate.

Authentication as the root site administrator

You need to pass your root site administrator password as an authentication token to every endpoint in this category except "Create a GitHub license."

Use the api_key parameter to send this token with each request. For example:

curl -L 'https://HOSTNAME:ADMIN-PORT/setup/api?api_key=YOUR_PASSWORD'

You can also use standard HTTP authentication to send this token. For example:

curl -L -u "api_key:YOUR_PASSWORD" 'https://HOSTNAME:ADMIN-PORT/setup/api'

Authentication as a Management Console user

Management Console user accounts can also authenticate to access this endpoint.

To authenticate with the password for a Management Console user account, use standard HTTP authentication. In the following example, replace YOUR_USER_NAME and YOUR_PASSWORD with the account's user name and password.

curl -L -u "YOUR_USER_NAME:YOUR_PASSWORD" 'https://HOSTNAME:ADMIN-PORT/setup/api'

Get the configuration status

This endpoint allows you to check the status of the most recent configuration process:

Note that you may need to wait several seconds after you start a process before you can check its status.

The different statuses are:

StatusDescription
PENDINGThe job has not started yet
CONFIGURINGThe job is running
DONEThe job has finished correctly
FAILEDThe job has finished unexpectedly

Коды состояния http-ответа для "Get the configuration status"

Код состоянияОписание
200

OK

401

Unauthorized

Примеры кода для "Get the configuration status"

Пример запроса

get/setup/api/configcheck
curl -L \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/configcheck

Response

Status: 200
{ "status": "running", "progress": [ { "status": "DONE", "key": "Appliance core components" }, { "status": "DONE", "key": "GitHub utilities" }, { "status": "DONE", "key": "GitHub applications" }, { "status": "CONFIGURING", "key": "GitHub services" }, { "status": "PENDING", "key": "Reloading appliance services" } ] }

Start a configuration process

This endpoint allows you to start a configuration process at any time for your updated settings to take effect:

Коды состояния http-ответа для "Start a configuration process"

Код состоянияОписание
202

Accepted

401

Unauthorized

Примеры кода для "Start a configuration process"

Пример запроса

post/setup/api/configure
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/configure

Response

Status: 202

Get the maintenance status

Check your installation's maintenance status:

Коды состояния http-ответа для "Get the maintenance status"

Код состоянияОписание
200

OK

401

Unauthorized

Примеры кода для "Get the maintenance status"

Пример запроса

get/setup/api/maintenance
curl -L \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/maintenance

Response

Status: 200
{ "status": "scheduled", "scheduled_time": "Tuesday, January 22 at 15:34 -0800", "connection_services": [ { "name": "git operations", "number": 0 }, { "name": "mysql queries", "number": 233 }, { "name": "aqueduct jobs", "number": 34 }, { "name": "resque jobs", "number": 54 } ] }

Enable or disable maintenance mode

Note: The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.

Параметры для "Enable or disable maintenance mode"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
maintenance string Обязательное поле

A JSON string with the attributes enabled and when.

The possible values for enabled are true and false. When it's false, the attribute when is ignored and the maintenance mode is turned off. when defines the time period when the maintenance was enabled.

The possible values for when are now or any date parseable by mojombo/chronic.

Коды состояния http-ответа для "Enable or disable maintenance mode"

Код состоянияОписание
200

OK

401

Unauthorized

Примеры кода для "Enable or disable maintenance mode"

Пример запроса

post/setup/api/maintenance
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/maintenance \ --data-urlencode 'maintenance={"enabled":true, "when":"now"}'

Response

Status: 200
{ "status": "scheduled", "scheduled_time": "Tuesday, January 22 at 15:34 -0800", "connection_services": [ { "name": "git operations", "number": 0 }, { "name": "mysql queries", "number": 233 }, { "name": "aqueduct jobs", "number": 34 }, { "name": "resque jobs", "number": 54 } ] }

Get settings

Gets the settings for your instance. To change settings, see the Set settings endpoint.

Note: You cannot retrieve the management console password with the Enterprise administration API.

Коды состояния http-ответа для "Get settings"

Код состоянияОписание
200

OK

401

Unauthorized

Примеры кода для "Get settings"

Пример запроса

get/setup/api/settings
curl -L \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/settings

Response

Status: 200
{ "enterprise": { "private_mode": false, "public_pages": false, "subdomain_isolation": true, "signup_enabled": false, "github_hostname": "ghe.local", "identicons_host": "dotcom", "http_proxy": null, "auth_mode": "default", "expire_sessions": false, "admin_password": null, "configuration_id": 1401777404, "configuration_run_count": 4, "avatar": { "enabled": false, "uri": "" }, "customer": { "name": "GitHub", "email": "stannis@themannis.biz", "uuid": "af6cac80-e4e1-012e-d822-1231380e52e9", "secret_key_data": "-----BEGIN PGP PRIVATE KEY BLOCK-----\nVersion: GnuPG v1.4.10 (GNU/Linux)\n\nlQcYBE5TCgsBEACk4yHpUcapplebaumBMXYMiLF+nCQ0lxpx...\n-----END PGP PRIVATE KEY BLOCK-----\n", "public_key_data": "-----BEGIN PGP PUBLIC KEY BLOCK-----\nVersion: GnuPG v1.4.10 (GNU/Linux)\n\nmI0ETqzZYgEEALSe6snowdenXyqvLfSQ34HWD6C7....\n-----END PGP PUBLIC KEY BLOCK-----\n" }, "license": { "seats": 0, "evaluation": false, "perpetual": false, "unlimited_seating": true, "support_key": "ssh-rsa AAAAB3N....", "ssh_allowed": true, "cluster_support": false, "expire_at": "2016-04-27T00:00:00-07:00" }, "github_ssl": { "enabled": false, "cert": null, "key": null }, "ldap": { "host": null, "port": 0, "base": [], "uid": null, "bind_dn": null, "password": null, "method": "Plain", "search_strategy": "detect", "user_groups": [], "admin_group": null, "virtual_attribute_enabled": false, "recursive_group_search": false, "posix_support": true, "user_sync_emails": false, "user_sync_keys": false, "user_sync_interval": 4, "team_sync_interval": 4, "sync_enabled": false, "reconciliation": { "user": null, "org": null }, "profile": { "uid": "uid", "name": null, "mail": null, "key": null } }, "cas": { "url": null }, "saml": { "sso_url": null, "certificate": null, "certificate_path": null, "issuer": null, "idp_initiated_sso": false, "disable_admin_demote": false }, "github_oauth": { "client_id": "12313412", "client_secret": "kj123131132", "organization_name": "Homestar Runners", "organization_team": "homestarrunners/characters" }, "smtp": { "enabled": true, "address": "smtp.example.com", "authentication": "plain", "port": "1234", "domain": "blah", "username": "foo", "user_name": "mr_foo", "enable_starttls_auto": true, "password": "bar", "discard-to-noreply-address": true, "support_address": "enterprise@github.com", "support_address_type": "email", "noreply_address": "noreply@github.com" }, "ntp": { "primary_server": "0.pool.ntp.org", "secondary_server": "1.pool.ntp.org" }, "timezone": null, "snmp": { "enabled": false, "community": "" }, "syslog": { "enabled": false, "server": null, "protocol_name": "udp" }, "assets": null, "pages": { "enabled": true }, "collectd": { "enabled": false, "server": null, "port": 0, "encryption": null, "username": null, "password": null }, "mapping": { "enabled": true, "tileserver": null, "basemap": "company.map-qsz2zrvs", "token": null }, "load_balancer": null }, "run_list": [ "recipe[enterprise-configure]" ] }

Set settings

Applies settings on your instance. For a list of the available settings, see the Get settings endpoint.

Notes:

  • The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.
  • You cannot set the management console password with the Enterprise administration API. Use the ghe-set-password utility to change the management console password. For more information, see "Command-line utilities."

Параметры для "Set settings"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
settings string Обязательное поле

A JSON string with the new settings. Note that you only need to pass the specific settings you want to modify. For a list of the available settings, see the Get settings endpoint.

Коды состояния http-ответа для "Set settings"

Код состоянияОписание
204

No Content

401

Unauthorized

Примеры кода для "Set settings"

Пример запроса

put/setup/api/settings
curl -L \ -X PUT \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/settings \ --data-urlencode 'settings={ "enterprise": { "public_pages": true }}'

Response

Status: 204

Get all authorized SSH keys

Коды состояния http-ответа для "Get all authorized SSH keys"

Код состоянияОписание
200

OK

401

Unauthorized

Примеры кода для "Get all authorized SSH keys"

Пример запроса

get/setup/api/settings/authorized-keys
curl -L \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/settings/authorized-keys

Response

Status: 200
[ { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" }, { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" }, { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" } ]

Add an authorized SSH key

Note: The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.

Параметры для "Add an authorized SSH key"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
authorized_key string Обязательное поле

The public SSH key.

Коды состояния http-ответа для "Add an authorized SSH key"

Код состоянияОписание
201

Created

401

Unauthorized

Примеры кода для "Add an authorized SSH key"

Пример запроса

post/setup/api/settings/authorized-keys
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/settings/authorized-keys \ --data-urlencode 'authorized_key=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQCssTL/Vtu/ODLTj0VtZoRAbvf7uiv5997GyDq0MoAZUjb5jmA5wYe2/wF6sFuhiZTnZoF1ZtCHunPp0hM/GHrn6VySBhNncx14YO8FPt1CIhEeRMSEjUK9cY3xAbS365oXY8vnUHJsS9+1tr/2bx/+4NJfcUt/Ezf1OR/0LStQXw=='

Response

Status: 201
[ { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" }, { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" }, { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" } ]

Remove an authorized SSH key

Note: The request body for this operation must be submitted as application/x-www-form-urlencoded data. You can submit a parameter value as a string, or you can use a tool such as curl to submit a parameter value as the contents of a text file. For more information, see the curl documentation.

Параметры для "Remove an authorized SSH key"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
authorized_key string Обязательное поле

The public SSH key.

Коды состояния http-ответа для "Remove an authorized SSH key"

Код состоянияОписание
200

OK

401

Unauthorized

Примеры кода для "Remove an authorized SSH key"

Пример запроса

delete/setup/api/settings/authorized-keys
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/settings/authorized-keys \ --data-urlencode 'authorized_key=ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQCssTL/Vtu/ODLTj0VtZoRAbvf7uiv5997GyDq0MoAZUjb5jmA5wYe2/wF6sFuhiZTnZoF1ZtCHunPp0hM/GHrn6VySBhNncx14YO8FPt1CIhEeRMSEjUK9cY3xAbS365oXY8vnUHJsS9+1tr/2bx/+4NJfcUt/Ezf1OR/0LStQXw=='

Response

Status: 200
[ { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" }, { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" }, { "key": "ssh-rsa AAAAB3NzaC1yc2EAAAAB...", "pretty-print": "ssh-rsa 01:14:0f:f2:0f:e2:fe:e8:f4:72:62:af:75:f7:1a:88:3e:04:92:64" } ]

Create a GitHub license

When you boot a GitHub instance for the first time, you can use the following endpoint to upload a license.

Note that you need to POST to /setup/api/configure to start the actual configuration process.

When using this endpoint, your GitHub instance must have a password set. This can be accomplished two ways:

  1. If you're working directly with the API before accessing the web interface, you must pass in the password parameter to set your password.
  2. If you set up your instance via the web interface before accessing the API, your calls to this endpoint do not need the password parameter.

Note: The request body for this operation must be submitted as multipart/form-data data. You can can reference the license file by prefixing the filename with the @ symbol using curl. For more information, see the curl documentation.

Параметры для "Create a GitHub license"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
license string Обязательное поле

The content of your .ghl license file.

password string

You must provide a password only if you are uploading your license for the first time. If you previously set a password through the web interface, you don't need this parameter.

settings string

An optional JSON string containing the installation settings. For a list of the available settings, see the Get settings endpoint.

Коды состояния http-ответа для "Create a GitHub license"

Код состоянияОписание
202

Accepted

401

Unauthorized

Примеры кода для "Create a GitHub license"

Пример запроса

post/setup/api/start
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/start \ --form 'license=@enterprise.ghl' --form 'password=secret'

Response

Status: 202

Upgrade a license

This API upgrades your license and also triggers the configuration process.

Note: The request body for this operation must be submitted as multipart/form-data data. You can can reference the license file by prefixing the filename with the @ symbol using curl. For more information, see the curl documentation.

Параметры для "Upgrade a license"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
license string

The content of your new .ghl license file.

Коды состояния http-ответа для "Upgrade a license"

Код состоянияОписание
202

Accepted

401

Unauthorized

Примеры кода для "Upgrade a license"

Пример запроса

post/setup/api/upgrade
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -u "api_key:your-password" \ http(s)://HOSTNAME/setup/api/upgrade \ --form 'license=@enterprise.ghl'

Response

Status: 202