Skip to main content

Эта версия GitHub Enterprise Server была прекращена 2024-03-26. Исправления выпускаться не будут даже при критических проблемах безопасности. Для повышения производительности, повышения безопасности и новых функций выполните обновление до последней версии GitHub Enterprise Server. Чтобы получить справку по обновлению, обратитесь в службу поддержки GitHub Enterprise.

Работа с реестром NuGet

В интерфейсе командной строки (CLI) dotnet можно настроить публикацию пакетов NuGet в GitHub Packages и использование пакетов, хранящихся в GitHub Packages, в качестве зависимостей в проекте .NET.

Note: This package type may not be available for your instance, because site administrators can enable or disable each supported package type. For more information, see "Configuring package ecosystem support for your enterprise."

Authenticating to GitHub Packages

You need an access token to publish, install, and delete private, internal, and public packages.

You can use a personal access token to authenticate to GitHub Packages or the GitHub Enterprise Server API. When you create a personal access token, you can assign the token different scopes depending on your needs. For more information about packages-related scopes for a personal access token, see "About permissions for GitHub Packages."

To authenticate to a GitHub Packages registry within a GitHub Actions workflow, you can use:

  • GITHUB_TOKEN to publish packages associated with the workflow repository.
  • a personal access token with at least read:packages scope to install packages associated with other private repositories (which GITHUB_TOKEN can't access).

Authenticating in a GitHub Actions workflow

Use the following command to authenticate to GitHub Packages in a GitHub Actions workflow using the GITHUB_TOKEN instead of hardcoding a personal access token in a nuget.config file in the repository:

dotnet nuget add source --username USERNAME --password ${{ secrets.GITHUB_TOKEN }} --store-password-in-clear-text --name github "https://nuget.HOSTNAME/NAMESPACE/index.json"

Replace NAMESPACE with the name of the personal account or organization that owns the repository where your packages are hosted.

For more information about GITHUB_TOKEN used in GitHub Actions workflows, see "Automatic token authentication."

Authenticating with a personal access token

You need an access token to publish, install, and delete private, internal, and public packages.

You can use a personal access token to authenticate to GitHub Packages or the GitHub Enterprise Server API. When you create a personal access token, you can assign the token different scopes depending on your needs. For more information about packages-related scopes for a personal access token, see "About permissions for GitHub Packages."

To authenticate to a GitHub Packages registry within a GitHub Actions workflow, you can use:

  • GITHUB_TOKEN to publish packages associated with the workflow repository.
  • a personal access token with at least read:packages scope to install packages associated with other private repositories (which GITHUB_TOKEN can't access).

You must use a personal access token with the appropriate scopes to publish and install packages in GitHub Packages. For more information, see "Introduction to GitHub Packages."

To authenticate to GitHub Packages with the dotnet command-line interface (CLI), create a nuget.config file in your project directory specifying GitHub Packages as a source under packageSources for the dotnet CLI client.

You must replace:

  • USERNAME with the name of your personal account on GitHub.
  • TOKEN with your personal access token.
  • NAMESPACE with the name of the personal account or organization that owns the repository where your packages are hosted.
  • HOSTNAME with the host name for your GitHub Enterprise Server instance.

If your instance has subdomain isolation enabled:

<?xml version="1.0" encoding="utf-8"?>
<configuration>
    <packageSources>
        <clear />
        <add key="github" value="https://nuget.HOSTNAME/NAMESPACE/index.json" />
    </packageSources>
    <packageSourceCredentials>
        <github>
            <add key="Username" value="USERNAME" />
            <add key="ClearTextPassword" value="TOKEN" />
        </github>
    </packageSourceCredentials>
</configuration>

If your instance has subdomain isolation disabled:

<?xml version="1.0" encoding="utf-8"?>
<configuration>
    <packageSources>
        <clear />
        <add key="github" value="https://HOSTNAME/_registry/nuget/NAMESPACE/index.json" />
    </packageSources>
    <packageSourceCredentials>
        <github>
            <add key="Username" value="USERNAME" />
            <add key="ClearTextPassword" value="TOKEN" />
        </github>
    </packageSourceCredentials>
</configuration>

Publishing a package

You can publish a package to GitHub Packages by authenticating with a nuget.config file, or by using the --api-key command line option with your GitHub personal access token.

Publishing a package using a GitHub personal access token as your API key

If you don't already have a personal access token to use for your account on your GitHub Enterprise Server instance, see "Managing your personal access tokens."

  1. Create a new project. Replace PROJECT_NAME with the name you'd like to give the project.

    dotnet new console --name PROJECT_NAME
    
  2. Package the project.

    dotnet pack --configuration Release
    
  3. Publish the package using your personal access token as the API key. Replace PROJECT_NAME with the name of the project, 1.0.0 with the version number of the package, and YOUR_GITHUB_PAT with your personal access token.

    dotnet nuget push "bin/Release/PROJECT_NAME.1.0.0.nupkg"  --api-key YOUR_GITHUB_PAT --source "github"
    

After you publish a package, you can view the package on GitHub. For more information, see "Viewing packages."

Publishing a package using a nuget.config file

When publishing, the OWNER of the repository specified in your .csproj file must match the NAMESPACE that you use in your nuget.config authentication file. Specify or increment the version number in your .csproj file, then use the dotnet pack command to create a .nuspec file for that version. For more information on creating your package, see "Create and publish a package" in the Microsoft documentation.

  1. Authenticate to GitHub Packages. For more information, see "Authenticating to GitHub Packages."

  2. Create a new project. Replace PROJECT_NAME with the name you'd like to give the project.

    dotnet new console --name PROJECT_NAME
    
  3. Add your project's specific information to your project's file, which ends in .csproj. Make sure to replace:

    • 1.0.0 with the version number of the package.
    • OWNER with the name of the personal account or organization that owns the repository to which you want to publish your package.
    • REPOSITORY with the name of the repository to which you want to connect your package.
    • HOSTNAME with the host name for your GitHub Enterprise Server instance.
    <Project Sdk="Microsoft.NET.Sdk">
    
      <PropertyGroup>
        <OutputType>Exe</OutputType>
        <TargetFramework>netcoreapp3.0</TargetFramework>
        <PackageId>PROJECT_NAME</PackageId>
        <Version>1.0.0</Version>
        <Authors>AUTHORS</Authors>
        <Company>COMPANY_NAME</Company>
        <PackageDescription>PACKAGE_DESCRIPTION</PackageDescription>
        <RepositoryUrl>https://HOSTNAME/OWNER/REPOSITORY</RepositoryUrl>
      </PropertyGroup>
    
    </Project>
    
  4. Package the project.

    dotnet pack --configuration Release
    
  5. Publish the package using the key you specified in the nuget.config file. Replace PROJECT_NAME with the name of the project, and replace 1.0.0 with the version number of the package.

    dotnet nuget push "bin/Release/PROJECT_NAME.1.0.0.nupkg" --source "github"
    

After you publish a package, you can view the package on GitHub. For more information, see "Viewing packages."

Publishing multiple packages to the same repository

To connect multiple packages to the same repository, use the same GitHub repository URL in the RepositoryURL fields in all .csproj project files. GitHub matches the repository based on that field.

The following example publishes the projects MY_APP and MY_OTHER_APP to the same repository:

<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <OutputType>Exe</OutputType>
    <TargetFramework>netcoreapp3.0</TargetFramework>
    <PackageId>MY_APP</PackageId>
    <Version>1.0.0</Version>
    <Authors>Octocat</Authors>
    <Company>GitHub</Company>
    <PackageDescription>This package adds a singing Octocat!</PackageDescription>
    <RepositoryUrl>https://HOSTNAME/my-org/my-repo</RepositoryUrl>
  </PropertyGroup>

</Project>
<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <OutputType>Exe</OutputType>
    <TargetFramework>netcoreapp3.0</TargetFramework>
    <PackageId>MY_OTHER_APP</PackageId>
    <Version>1.0.0</Version>
    <Authors>Octocat</Authors>
    <Company>GitHub</Company>
    <PackageDescription>This package adds a dancing Octocat!</PackageDescription>
    <RepositoryUrl>https://HOSTNAME/my-org/my-repo</RepositoryUrl>
  </PropertyGroup>

</Project>

Installing a package

Using packages from GitHub in your project is similar to using packages from nuget.org. Add your package dependencies to your .csproj file, specifying the package name and version. For more information on using a .csproj file in your project, see "Working with NuGet packages" in the Microsoft documentation.

  1. Authenticate to GitHub Packages. For more information, see "Authenticating to GitHub Packages."

  2. To use a package, add ItemGroup and configure the PackageReference field in the .csproj project file. Replace the PACKAGE_NAME value in Include="PACKAGE_NAME" with your package dependency, and replace the X.X.X value in Version="X.X.X" with the version of the package you want to use:

    <Project Sdk="Microsoft.NET.Sdk">
    
      <PropertyGroup>
        <OutputType>Exe</OutputType>
        <TargetFramework>netcoreapp3.0</TargetFramework>
        <PackageId>My-app</PackageId>
        <Version>1.0.0</Version>
       <Authors>Octocat</Authors>
        <Company>GitHub</Company>
       <PackageDescription>This package adds an Octocat!</PackageDescription>
        <RepositoryUrl>https://HOSTNAME/OWNER/REPOSITORY</RepositoryUrl>
      </PropertyGroup>
    
      <ItemGroup>
        <PackageReference Include="PACKAGE_NAME" Version="X.X.X" />
      </ItemGroup>
    
    </Project>
    
  3. Install the packages with the restore command.

    dotnet restore
    

Troubleshooting

Your NuGet package may fail to push if the RepositoryUrl in .csproj is not set to the expected repository.

If you're using a nuspec file, ensure that it has a repository element with the required type and url attributes.

If you're using a GITHUB_TOKEN to authenticate to a GitHub Packages registry within a GitHub Actions workflow, the token cannot access private repository-based packages in a different repository other than where the workflow is running in. To access packages associated with other repositories, instead generate a personal access token with the read:packages scope and pass this token in as a secret.

Further reading