Skip to main content
REST API теперь версия. Дополнительные сведения см. в разделе "О управлении версиями API".

Пакеты

Use the REST API to interact with GitHub Packages.

About GitHub Packages

GitHub Packages supports a range of package managers for publishing packages. For more information, see "Introduction to GitHub Packages."

After you publish a package, you can use the REST API to manage the package in your GitHub repositories and organizations. For more information, see "Deleting and restoring a package."

To use the REST API to manage GitHub Packages, you must authenticate using a personal access token (classic).

  • To access package metadata, your token must include the read:packages scope.
  • To delete packages and package versions, your token must include the read:packages and delete:packages scopes.
  • To restore packages and package versions, your token must include the read:packages and write:packages scopes.

If your package is in a registry that supports granular permissions, then your token does not need the repo scope to access or manage this package. If your package is in a registry that only supports repository-scoped permissions, then your token must also include the repo scope since your package inherits permissions from a GitHub repository. For a list of registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

To access resources in an organization with SSO enabled, you must enable SSO for your personal access token (classic). For more information, see "Authorizing a personal access token for use with SAML single sign-on."

Get list of conflicting packages during Docker migration for organization

Lists all packages that are in a specific organization, are readable by the requesting user, and that encountered a conflict during a Docker migration. To use this endpoint, you must authenticate using an access token with the read:packages scope.

Параметры для "Get list of conflicting packages during Docker migration for organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
org string Обязательное поле

The organization name. The name is not case sensitive.

Коды состояния http-ответа для "Get list of conflicting packages during Docker migration for organization"

Код состоянияОписание
200

OK

401

Requires authentication

403

Forbidden

Примеры кода для "Get list of conflicting packages during Docker migration for organization"

get/orgs/{org}/docker/conflicts
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/docker/conflicts

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker" } ]

List packages for an organization

Lists packages in an organization readable by the user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "List packages for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
org string Обязательное поле

The organization name. The name is not case sensitive.

Параметры запроса
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

visibility string

The selected visibility of the packages. This parameter is optional and only filters an existing result set.

The internal visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems internal is synonymous with private. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages."

Возможные значения: public, private, internal

page integer

Page number of the results to fetch.

По умолчанию.: 1

per_page integer

The number of results per page (max 100).

По умолчанию.: 30

Коды состояния http-ответа для "List packages for an organization"

Код состоянияОписание
200

OK

400

The value of per_page multiplied by page cannot be greater than 10000.

401

Requires authentication

403

Forbidden

Примеры кода для "List packages for an organization"

get/orgs/{org}/packages
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ "https://api.github.com/orgs/ORG/packages?package_type=container"

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker" } ]

Get a package for an organization

Gets a specific package in an organization.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Get a package for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

Коды состояния http-ответа для "Get a package for an organization"

Код состоянияОписание
200

OK

Примеры кода для "Get a package for an organization"

get/orgs/{org}/packages/{package_type}/{package_name}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200
{ "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/github", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "Organization", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }

Delete a package for an organization

Deletes an entire package in an organization. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Delete a package for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

Коды состояния http-ответа для "Delete a package for an organization"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Delete a package for an organization"

delete/orgs/{org}/packages/{package_type}/{package_name}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for an organization

Restores an entire package in an organization.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Restore a package for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

Параметры запроса
Имя., Тип, Description
token string

package token

Коды состояния http-ответа для "Restore a package for an organization"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Restore a package for an organization"

post/orgs/{org}/packages/{package_type}/{package_name}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by an organization

Lists package versions for a package owned by an organization.

If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "List package versions for a package owned by an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

Параметры запроса
Имя., Тип, Description
page integer

Page number of the results to fetch.

По умолчанию.: 1

per_page integer

The number of results per page (max 100).

По умолчанию.: 30

state string

The state of the package, either active or deleted.

По умолчанию.: active

Возможные значения: active, deleted

Коды состояния http-ответа для "List package versions for a package owned by an organization"

Код состоянияОписание
200

OK

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "List package versions for a package owned by an organization"

get/orgs/{org}/packages/{package_type}/{package_name}/versions
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200
[ { "id": 245301, "name": "1.0.4", "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/245301", "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752", "created_at": "2019-11-05T22:49:04Z", "updated_at": "2019-11-05T22:49:04Z", "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.4", "metadata": { "package_type": "npm" } }, { "id": 209672, "name": "1.0.3", "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/209672", "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752", "created_at": "2019-10-29T15:42:11Z", "updated_at": "2019-10-29T15:42:12Z", "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.3", "metadata": { "package_type": "npm" } } ]

Get a package version for an organization

Gets a specific package version in an organization.

You must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Get a package version for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Get a package version for an organization"

Код состоянияОписание
200

OK

Примеры кода для "Get a package version for an organization"

get/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200
{ "id": 836, "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344", "url": "https://api.github.com/orgs/github/packages/container/hello_docker/versions/836", "package_html_url": "https://github.com/orgs/github/packages/container/package/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/hello_docker/836", "metadata": { "package_type": "container", "container": { "tags": [ "latest" ] } } }

Delete package version for an organization

Deletes a specific package version in an organization. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Delete package version for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Delete package version for an organization"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Delete package version for an organization"

delete/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for an organization

Restores a specific package version in an organization.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Restore package version for an organization"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

org string Обязательное поле

The organization name. The name is not case sensitive.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Restore package version for an organization"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Restore package version for an organization"

post/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for authenticated-user

Lists all packages that are owned by the authenticated user within the user's namespace, and that encountered a conflict during a Docker migration. To use this endpoint, you must authenticate using an access token with the read:packages scope.

Коды состояния http-ответа для "Get list of conflicting packages during Docker migration for authenticated-user"

Код состоянияОписание
200

OK

Примеры кода для "Get list of conflicting packages during Docker migration for authenticated-user"

get/user/docker/conflicts
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/docker/conflicts

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

List packages for the authenticated user's namespace

Lists packages owned by the authenticated user within the user's namespace.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "List packages for the authenticated user's namespace"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры запроса
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

visibility string

The selected visibility of the packages. This parameter is optional and only filters an existing result set.

The internal visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems internal is synonymous with private. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages."

Возможные значения: public, private, internal

page integer

Page number of the results to fetch.

По умолчанию.: 1

per_page integer

The number of results per page (max 100).

По умолчанию.: 30

Коды состояния http-ответа для "List packages for the authenticated user's namespace"

Код состоянияОписание
200

OK

400

The value of per_page multiplied by page cannot be greater than 10000.

Примеры кода для "List packages for the authenticated user's namespace"

get/user/packages
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ "https://api.github.com/user/packages?package_type=container"

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

Get a package for the authenticated user

Gets a specific package for a package owned by the authenticated user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Get a package for the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

Коды состояния http-ответа для "Get a package for the authenticated user"

Код состоянияОписание
200

OK

Примеры кода для "Get a package for the authenticated user"

get/user/packages/{package_type}/{package_name}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200
{ "id": 40201, "name": "octo-name", "package_type": "rubygems", "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "version_count": 3, "visibility": "public", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name", "created_at": "2019-10-20T14:17:14Z", "updated_at": "2019-10-20T14:17:14Z", "repository": { "id": 216219492, "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=", "name": "octo-name-repo", "full_name": "octocat/octo-name-repo", "private": false, "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "html_url": "https://github.com/octocat/octo-name-repo", "description": "Project for octocats", "fork": false, "url": "https://api.github.com/repos/octocat/octo-name-repo", "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks", "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}", "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}", "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams", "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks", "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}", "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events", "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}", "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}", "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags", "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}", "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}", "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}", "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}", "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}", "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages", "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers", "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors", "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers", "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription", "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}", "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}", "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}", "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}", "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}", "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}", "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges", "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}", "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads", "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}", "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}", "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}", "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}", "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}", "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}", "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments" }, "html_url": "https://github.com/octocat/octo-name-repo/packages/40201" }

Delete a package for the authenticated user

Deletes a package owned by the authenticated user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must authenticate using an access token with the read:packages and delete:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Delete a package for the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

Коды состояния http-ответа для "Delete a package for the authenticated user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Delete a package for the authenticated user"

delete/user/packages/{package_type}/{package_name}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for the authenticated user

Restores a package owned by the authenticated user.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Restore a package for the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

Параметры запроса
Имя., Тип, Description
token string

package token

Коды состояния http-ответа для "Restore a package for the authenticated user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Restore a package for the authenticated user"

post/user/packages/{package_type}/{package_name}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by the authenticated user

Lists package versions for a package owned by the authenticated user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "List package versions for a package owned by the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

Параметры запроса
Имя., Тип, Description
page integer

Page number of the results to fetch.

По умолчанию.: 1

per_page integer

The number of results per page (max 100).

По умолчанию.: 30

state string

The state of the package, either active or deleted.

По умолчанию.: active

Возможные значения: active, deleted

Коды состояния http-ответа для "List package versions for a package owned by the authenticated user"

Код состоянияОписание
200

OK

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "List package versions for a package owned by the authenticated user"

get/user/packages/{package_type}/{package_name}/versions
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200
[ { "id": 45763, "name": "sha256:08a44bab0bddaddd8837a8b381aebc2e4b933768b981685a9e088360af0d3dd9", "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/45763", "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker", "created_at": "2020-09-11T21:56:40Z", "updated_at": "2021-02-05T21:32:32Z", "html_url": "https://github.com/users/octocat/packages/container/hello_docker/45763", "metadata": { "package_type": "container", "container": { "tags": [ "latest" ] } } }, { "id": 881, "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344", "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/881", "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker", "created_at": "2020-05-21T22:22:20Z", "updated_at": "2021-02-05T21:32:32Z", "html_url": "https://github.com/users/octocat/packages/container/hello_docker/881", "metadata": { "package_type": "container", "container": { "tags": [] } } } ]

Get a package version for the authenticated user

Gets a specific package version for a package owned by the authenticated user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Get a package version for the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Get a package version for the authenticated user"

Код состоянияОписание
200

OK

Примеры кода для "Get a package version for the authenticated user"

get/user/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200
{ "id": 214, "name": "sha256:3561f0cff06caccddb99c93bd26e712fcc56a811de0f8ea7a17bb865f30b176a", "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/214", "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker", "created_at": "2020-05-15T03:46:45Z", "updated_at": "2020-05-15T03:46:45Z", "html_url": "https://github.com/users/octocat/packages/container/hello_docker/214", "metadata": { "package_type": "container", "container": { "tags": [ "1.13.6" ] } } }

Delete a package version for the authenticated user

Deletes a specific package version for a package owned by the authenticated user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must have admin permissions in the organization and authenticate using an access token with the read:packages and delete:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Delete a package version for the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Delete a package version for the authenticated user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Delete a package version for the authenticated user"

delete/user/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore a package version for the authenticated user

Restores a package version owned by the authenticated user.

You can restore a deleted package version under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Restore a package version for the authenticated user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Restore a package version for the authenticated user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Restore a package version for the authenticated user"

post/user/packages/{package_type}/{package_name}/versions/{package_version_id}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for user

Lists all packages that are in a specific user's namespace, that the requesting user has access to, and that encountered a conflict during Docker migration. To use this endpoint, you must authenticate using an access token with the read:packages scope.

Параметры для "Get list of conflicting packages during Docker migration for user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
username string Обязательное поле

The handle for the GitHub user account.

Коды состояния http-ответа для "Get list of conflicting packages during Docker migration for user"

Код состоянияОписание
200

OK

401

Requires authentication

403

Forbidden

Примеры кода для "Get list of conflicting packages during Docker migration for user"

get/users/{username}/docker/conflicts
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/docker/conflicts

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

List packages for a user

Lists all packages in a user's namespace for which the requesting user has access.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "List packages for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
username string Обязательное поле

The handle for the GitHub user account.

Параметры запроса
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

visibility string

The selected visibility of the packages. This parameter is optional and only filters an existing result set.

The internal visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems internal is synonymous with private. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages."

Возможные значения: public, private, internal

page integer

Page number of the results to fetch.

По умолчанию.: 1

per_page integer

The number of results per page (max 100).

По умолчанию.: 30

Коды состояния http-ответа для "List packages for a user"

Код состоянияОписание
200

OK

400

The value of per_page multiplied by page cannot be greater than 10000.

401

Requires authentication

403

Forbidden

Примеры кода для "List packages for a user"

get/users/{username}/packages
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ "https://api.github.com/users/USERNAME/packages?package_type=container"

Response

Status: 200
[ { "id": 197, "name": "hello_docker", "package_type": "container", "owner": { "login": "octocat", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 1, "visibility": "private", "url": "https://api.github.com/orgs/github/packages/container/hello_docker", "created_at": "2020-05-19T22:19:11Z", "updated_at": "2020-05-19T22:19:11Z", "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker" }, { "id": 198, "name": "goodbye_docker", "package_type": "container", "owner": { "login": "github", "id": 9919, "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=", "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/github", "followers_url": "https://api.github.com/users/github/followers", "following_url": "https://api.github.com/users/github/following{/other_user}", "gists_url": "https://api.github.com/users/github/gists{/gist_id}", "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/github/subscriptions", "organizations_url": "https://api.github.com/users/github/orgs", "repos_url": "https://api.github.com/users/github/repos", "events_url": "https://api.github.com/users/github/events{/privacy}", "received_events_url": "https://api.github.com/users/github/received_events", "type": "User", "site_admin": false }, "version_count": 2, "visibility": "private", "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker", "created_at": "2020-05-20T22:19:11Z", "updated_at": "2020-05-20T22:19:11Z", "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker" } ]

Get a package for a user

Gets a specific package metadata for a public package owned by a user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Get a package for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

username string Обязательное поле

The handle for the GitHub user account.

Коды состояния http-ответа для "Get a package for a user"

Код состоянияОписание
200

OK

Примеры кода для "Get a package for a user"

get/users/{username}/packages/{package_type}/{package_name}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200
{ "id": 40201, "name": "octo-name", "package_type": "rubygems", "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "version_count": 3, "visibility": "public", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name", "created_at": "2019-10-20T14:17:14Z", "updated_at": "2019-10-20T14:17:14Z", "repository": { "id": 216219492, "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=", "name": "octo-name-repo", "full_name": "octocat/octo-name-repo", "private": false, "owner": { "login": "octocat", "id": 209477, "node_id": "MDQ6VXNlcjIwOTQ3Nw==", "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4", "gravatar_id": "", "url": "https://api.github.com/users/octocat", "html_url": "https://github.com/octocat", "followers_url": "https://api.github.com/users/octocat/followers", "following_url": "https://api.github.com/users/octocat/following{/other_user}", "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}", "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}", "subscriptions_url": "https://api.github.com/users/octocat/subscriptions", "organizations_url": "https://api.github.com/users/octocat/orgs", "repos_url": "https://api.github.com/users/octocat/repos", "events_url": "https://api.github.com/users/octocat/events{/privacy}", "received_events_url": "https://api.github.com/users/octocat/received_events", "type": "User", "site_admin": true }, "html_url": "https://github.com/octocat/octo-name-repo", "description": "Project for octocats", "fork": false, "url": "https://api.github.com/repos/octocat/octo-name-repo", "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks", "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}", "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}", "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams", "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks", "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}", "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events", "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}", "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}", "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags", "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}", "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}", "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}", "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}", "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}", "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages", "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers", "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors", "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers", "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription", "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}", "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}", "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}", "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}", "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}", "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}", "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges", "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}", "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads", "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}", "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}", "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}", "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}", "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}", "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}", "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments" }, "html_url": "https://github.com/octocat/octo-name-repo/packages/40201" }

Delete a package for a user

Deletes an entire package for a user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Delete a package for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

username string Обязательное поле

The handle for the GitHub user account.

Коды состояния http-ответа для "Delete a package for a user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Delete a package for a user"

delete/users/{username}/packages/{package_type}/{package_name}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for a user

Restores an entire package for a user.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Restore a package for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

username string Обязательное поле

The handle for the GitHub user account.

Параметры запроса
Имя., Тип, Description
token string

package token

Коды состояния http-ответа для "Restore a package for a user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Restore a package for a user"

post/users/{username}/packages/{package_type}/{package_name}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by a user

Lists package versions for a public package owned by a specified user.

To use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "List package versions for a package owned by a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

username string Обязательное поле

The handle for the GitHub user account.

Коды состояния http-ответа для "List package versions for a package owned by a user"

Код состоянияОписание
200

OK

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "List package versions for a package owned by a user"

get/users/{username}/packages/{package_type}/{package_name}/versions
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200
[ { "id": 3497268, "name": "0.3.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/3497268", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2020-08-31T15:22:11Z", "updated_at": "2020-08-31T15:22:12Z", "description": "Project for octocats", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.3.0", "metadata": { "package_type": "rubygems" } }, { "id": 387039, "name": "0.2.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2019-12-01T20:49:29Z", "updated_at": "2019-12-01T20:49:30Z", "description": "Project for octocats", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0", "metadata": { "package_type": "rubygems" } }, { "id": 169770, "name": "0.1.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/169770", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2019-10-20T14:17:14Z", "updated_at": "2019-10-20T14:17:15Z", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.1.0", "metadata": { "package_type": "rubygems" } } ]

Get a package version for a user

Gets a specific package version for a public package owned by a specified user.

At this time, to use this endpoint, you must authenticate using an access token with the read:packages scope. If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of GitHub Packages registries that only support repository-scoped permissions, see "About permissions for GitHub Packages."

Параметры для "Get a package version for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

package_version_id integer Обязательное поле

Unique identifier of the package version.

username string Обязательное поле

The handle for the GitHub user account.

Коды состояния http-ответа для "Get a package version for a user"

Код состоянияОписание
200

OK

Примеры кода для "Get a package version for a user"

get/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200
{ "id": 387039, "name": "0.2.0", "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039", "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201", "license": "MIT", "created_at": "2019-12-01T20:49:29Z", "updated_at": "2019-12-01T20:49:30Z", "description": "Octo-name client for Ruby", "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0", "metadata": { "package_type": "rubygems" } }

Delete package version for a user

Deletes a specific package version for a user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

To use this endpoint, you must authenticate using an access token with the read:packages and delete:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to delete. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Delete package version for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

username string Обязательное поле

The handle for the GitHub user account.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Delete package version for a user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Delete package version for a user"

delete/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}
curl -L \ -X DELETE \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for a user

Restores a specific package version for a user.

You can restore a deleted package under the following conditions:

  • The package was deleted within the last 30 days.
  • The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

To use this endpoint, you must authenticate using an access token with the read:packages and write:packages scopes. In addition:

  • If the package_type belongs to a GitHub Packages registry that only supports repository-scoped permissions, your token must also include the repo scope. For the list of these registries, see "About permissions for GitHub Packages."
  • If the package_type belongs to a GitHub Packages registry that supports granular permissions, you must have admin permissions to the package whose version you want to restore. For the list of these registries, see "About permissions for GitHub Packages."

Параметры для "Restore package version for a user"

Заголовки
Имя., Тип, Description
accept string

Setting to application/vnd.github+json is recommended.

Параметры пути
Имя., Тип, Description
package_type string Обязательное поле

The type of supported package. Packages in GitHub's Gradle registry have the type maven. Docker images pushed to GitHub's Container registry (ghcr.io) have the type container. You can use the type docker to find images that were pushed to GitHub's Docker registry (docker.pkg.github.com), even if these have now been migrated to the Container registry.

Возможные значения: npm, maven, rubygems, docker, nuget, container

package_name string Обязательное поле

The name of the package.

username string Обязательное поле

The handle for the GitHub user account.

package_version_id integer Обязательное поле

Unique identifier of the package version.

Коды состояния http-ответа для "Restore package version for a user"

Код состоянияОписание
204

No Content

401

Requires authentication

403

Forbidden

404

Resource not found

Примеры кода для "Restore package version for a user"

post/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore
curl -L \ -X POST \ -H "Accept: application/vnd.github+json" \ -H "Authorization: Bearer <YOUR-TOKEN>" \ -H "X-GitHub-Api-Version: 2022-11-28" \ https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204