Configuring built-in firewall rules

You can view default firewall rules and customize rules for sua instância do GitHub Enterprise Server.

Melhore a segurança da sua instância

7 de 9 no roteiro de aprendizagem
Avançar:Práticas recomendadas de segurança de usuários

Neste artigo

About sua instância do GitHub Enterprise Server's firewall

GitHub Enterprise Server uses Ubuntu's Uncomplicated Firewall (UFW) on the virtual appliance. For more information see "UFW" in the Ubuntu documentation. GitHub Enterprise Server automatically updates the firewall allowlist of allowed services with each release.

After you install GitHub Enterprise Server, all required network ports are automatically opened to accept connections. Every non-required port is automatically configured as deny, and the default outgoing policy is configured as allow. Stateful tracking is enabled for any new connections; these are typically network packets with the SYN bit set. For more information, see "Network ports."

The UFW firewall also opens several other ports that are required for GitHub Enterprise Server to operate properly. For more information on the UFW rule set, see the UFW README.

We do not recommend customizing UFW as it can complicate some troubleshooting issues.

Viewing the default firewall rules

  1. Conecte-se via SSH ao sua instância do GitHub Enterprise Server. Se sua instância for composta por vários nós, por exemplo, se a alta disponibilidade ou a replicação geográfica estiver configurada, efetue SSH no nó primário. Se você usar um cluster, poderá efetuar SSH em qualquer nó. Substitua HOSTNAME pelo nome do host da instância ou pelo nome do host ou endereço IP de um nó. Para obter mais informações, confira "Acesar o shell administrativo (SSH)".

    Shell
    ssh -p 122 admin@HOSTNAME

  2. To view the default firewall rules, use the sudo ufw status command. You should see output similar to this:

    $ sudo ufw status
> Status: active
> To                         Action      From
> --                         ------      ----
> ghe-1194                   ALLOW       Anywhere
> ghe-122                    ALLOW       Anywhere
> ghe-161                    ALLOW       Anywhere
> ghe-22                     ALLOW       Anywhere
> ghe-25                     ALLOW       Anywhere
> ghe-443                    ALLOW       Anywhere
> ghe-80                     ALLOW       Anywhere
> ghe-8080                   ALLOW       Anywhere
> ghe-8443                   ALLOW       Anywhere
> ghe-9418                   ALLOW       Anywhere
> ghe-1194 (v6)              ALLOW       Anywhere (v6)
> ghe-122 (v6)               ALLOW       Anywhere (v6)
> ghe-161 (v6)               ALLOW       Anywhere (v6)
> ghe-22 (v6)                ALLOW       Anywhere (v6)
> ghe-25 (v6)                ALLOW       Anywhere (v6)
> ghe-443 (v6)               ALLOW       Anywhere (v6)
> ghe-80 (v6)                ALLOW       Anywhere (v6)
> ghe-8080 (v6)              ALLOW       Anywhere (v6)
> ghe-8443 (v6)              ALLOW       Anywhere (v6)
> ghe-9418 (v6)              ALLOW       Anywhere (v6)

Adding custom firewall rules

Warning: Before you add custom firewall rules, back up your current rules in case you need to reset to a known working state. If you're locked out of your server, visit Suporte do GitHub Enterprise and contact us to reconfigure the original firewall rules. Restoring the original firewall rules involves downtime for your server.

  1. Configure a custom firewall rule.

  2. Check the status of each new rule with the status numbered command.

    sudo ufw status numbered

  3. To back up your custom firewall rules, use the cpcommand to move the rules to a new file.

    sudo cp -r /etc/ufw ~/ufw.backup

After you upgrade sua instância do GitHub Enterprise Server, you must reapply your custom firewall rules. We recommend that you create a script to reapply your firewall custom rules.

Restoring the default firewall rules

If something goes wrong after you change the firewall rules, you can reset the rules from your original backup.

Warning: If you didn't back up the original rules before making changes to the firewall, visit Suporte do GitHub Enterprise and contact us for further assistance.

  1. Conecte-se via SSH ao sua instância do GitHub Enterprise Server. Se sua instância for composta por vários nós, por exemplo, se a alta disponibilidade ou a replicação geográfica estiver configurada, efetue SSH no nó primário. Se você usar um cluster, poderá efetuar SSH em qualquer nó. Substitua HOSTNAME pelo nome do host da instância ou pelo nome do host ou endereço IP de um nó. Para obter mais informações, confira "Acesar o shell administrativo (SSH)".

    Shell
    ssh -p 122 admin@HOSTNAME

  2. To restore the previous backup rules, copy them back to the firewall with the cp command.

    sudo cp -f ~/ufw.backup/*rules /etc/ufw

  3. Restart the firewall with the systemctl command.

    sudo systemctl restart ufw

  4. Confirm that the rules are back to their defaults with the ufw status command.

    $ sudo ufw status
> Status: active
> To                         Action      From
> --                         ------      ----
> ghe-1194                   ALLOW       Anywhere
> ghe-122                    ALLOW       Anywhere
> ghe-161                    ALLOW       Anywhere
> ghe-22                     ALLOW       Anywhere
> ghe-25                     ALLOW       Anywhere
> ghe-443                    ALLOW       Anywhere
> ghe-80                     ALLOW       Anywhere
> ghe-8080                   ALLOW       Anywhere
> ghe-8443                   ALLOW       Anywhere
> ghe-9418                   ALLOW       Anywhere
> ghe-1194 (v6)              ALLOW       Anywhere (v6)
> ghe-122 (v6)               ALLOW       Anywhere (v6)
> ghe-161 (v6)               ALLOW       Anywhere (v6)
> ghe-22 (v6)                ALLOW       Anywhere (v6)
> ghe-25 (v6)                ALLOW       Anywhere (v6)
> ghe-443 (v6)               ALLOW       Anywhere (v6)
> ghe-80 (v6)                ALLOW       Anywhere (v6)
> ghe-8080 (v6)              ALLOW       Anywhere (v6)
> ghe-8443 (v6)              ALLOW       Anywhere (v6)
> ghe-9418 (v6)              ALLOW       Anywhere (v6)
AnteriorNetwork portsAvançarPráticas recomendadas de segurança de usuários