git filter-repo tool and the BFG Repo-Cleaner rewrite your repository's history, which changes the SHAs for existing commits that you alter and any dependent commits. Changed commit SHAs may affect open pull requests in your repository. We recommend merging or closing all open pull requests before removing files from your repository.
You can remove the file from the latest commit with
git rm. For information on removing a file that was added with the latest commit, see "About large files on GitHub."
Warning: This article tells you how to make commits with sensitive data unreachable from any branches or tags in your repository on GitHub.com. However, those commits may still be accessible in any clones or forks of your repository, directly via their SHA-1 hashes in cached views on GitHub, and through any pull requests that reference them. You cannot remove sensitive data from other users' clones of your repository, but you can permanently remove cached views and references to the sensitive data in pull requests on GitHub by contacting us through the GitHub Support portal.
Once you have pushed a commit to GitHub, you should consider any sensitive data in the commit compromised. If you have committed a password, you should change it. If you have committed a key, generate a new one. Removing the compromised data doesn't resolve its initial exposure, especially in existing clones or forks of your repository.
If the commit that introduced the sensitive data exists in any forks of your repository, it will continue to be accessible unless the fork owner also removes the sensitive data from their fork or deletes the fork entirely. You will need to coordinate with the owners of any forks of your repository, asking them to take the appropriate actions. Please note that GitHub cannot provide contact information for these owners.
Consider these limitations and challenges in your decision to rewrite your repository's history.
You can purge a file from your repository's history using either the
git filter-repo tool or the BFG Repo-Cleaner open source tool.
Note: If sensitive data is located in a file that's identified as a binary file, you'll need to remove the file from the history, as you can't modify it to remove or replace the data.
The BFG Repo-Cleaner is a tool that's built and maintained by the open source community. It provides a faster, simpler alternative to
git filter-repo for removing unwanted data.
For example, to remove your file with sensitive data and leave your latest commit untouched, run:
bfg --delete-files YOUR-FILE-WITH-SENSITIVE-DATA
To replace all text listed in
passwords.txt wherever it can be found in your repository's history, run:
bfg --replace-text passwords.txt
After the sensitive data is removed, you must force push your changes to GitHub. Force pushing rewrites the repository history, which removes sensitive data from the commit history. If you force push, it may overwrite commits that other people have based their work on.
git push --force
See the BFG Repo-Cleaner's documentation for full usage and download instructions.
Warning: If you run
git filter-repo after stashing changes, you won't be able to retrieve your changes with other stash commands. Before running
git filter-repo, we recommend unstashing any changes you've made. To unstash the last set of changes you've stashed, run
git stash show -p | git apply -R. For more information, see Git Tools - Stashing and Cleaning.
To illustrate how
git filter-repo works, we'll show you how to remove your file with sensitive data from the history of your repository and add it to
.gitignore to ensure that it is not accidentally re-committed.
Install the latest release of the git filter-repo tool. You can install
git-filter-repomanually or by using a package manager. For example, to install the tool with HomeBrew, use the
brew install git-filter-repo
For more information, see INSTALL.md in the
If you don't already have a local copy of your repository with sensitive data in its history, clone the repository to your local computer.
git clone https://github.com/YOUR-USERNAME/YOUR-REPOSITORY Initialized empty Git repository in /Users/YOUR-FILE-PATH/YOUR-REPOSITORY/.git/ remote: Counting objects: 1301, done. remote: Compressing objects: 100% (769/769), done. remote: Total 1301 (delta 724), reused 910 (delta 522) Receiving objects: 100% (1301/1301), 164.39 KiB, done. Resolving deltas: 100% (724/724), done.
Navigate into the repository's working directory.
Run the following command, replacing
PATH-TO-YOUR-FILE-WITH-SENSITIVE-DATAwith the path to the file you want to remove, not just its filename. These arguments will:
Force Git to process, but not check out, the entire history of every branch and tag
Remove the specified file, as well as any empty commits generated as a result
Remove some configurations, such as the remote URL, stored in the .git/config file. You may want to back up this file in advance for restoration later.
Overwrite your existing tags
git filter-repo --invert-paths --path PATH-TO-YOUR-FILE-WITH-SENSITIVE-DATA Parsed 197 commits New history written in 0.11 seconds; now repacking/cleaning... Repacking your repo and cleaning out old unneeded objects Enumerating objects: 210, done. Counting objects: 100% (210/210), done. Delta compression using up to 12 threads Compressing objects: 100% (127/127), done. Writing objects: 100% (210/210), done. Building bitmaps: 100% (48/48), done. Total 210 (delta 98), reused 144 (delta 75), pack-reused 0 Completely finished after 0.64 seconds.
Note: If the file with sensitive data used to exist at any other paths (because it was moved or renamed), you must run this command on those paths, as well.
Add your file with sensitive data to
.gitignoreto ensure that you don't accidentally commit it again.
echo "YOUR-FILE-WITH-SENSITIVE-DATA" >> .gitignore git add .gitignore git commit -m "Add YOUR-FILE-WITH-SENSITIVE-DATA to .gitignore" [main 051452f] Add YOUR-FILE-WITH-SENSITIVE-DATA to .gitignore 1 files changed, 1 insertions(+), 0 deletions(-)
Double-check that you've removed everything you wanted to from your repository's history, and that all of your branches are checked out.
git filter-repotool will automatically remove your configured remotes. Use the
git remote set-urlcommand to restore your remotes, replacing
REPOwith your repository details. For more information, see "Managing remote repositories."
git remote add origin https://github.com/OWNER/REPOSITORY.git
Once you're happy with the state of your repository, and you have set the appropriate remote, force-push your local changes to overwrite your repository on GitHub.com, as well as all the branches you've pushed up. A force push is required to remove sensitive data from your commit history.
git push origin --force --all Counting objects: 1074, done. Delta compression using 2 threads. Compressing objects: 100% (677/677), done. Writing objects: 100% (1058/1058), 148.85 KiB, done. Total 1058 (delta 590), reused 602 (delta 378) To https://github.com/YOUR-USERNAME/YOUR-REPOSITORY.git + 48dc599...051452f main -> main (forced update)
In order to remove the sensitive file from your tagged releases, you'll also need to force-push against your Git tags:
git push origin --force --tags Counting objects: 321, done. Delta compression using up to 8 threads. Compressing objects: 100% (166/166), done. Writing objects: 100% (321/321), 331.74 KiB | 0 bytes/s, done. Total 321 (delta 124), reused 269 (delta 108) To https://github.com/YOUR-USERNAME/YOUR-REPOSITORY.git + 48dc599...051452f main -> main (forced update)
After using either the BFG tool or
git filter-repo to remove the sensitive data and pushing your changes to GitHub, you must take a few more steps to fully remove the data from GitHub.
Contact us through the GitHub Support portal, and ask to remove cached views and references to the sensitive data in pull requests on GitHub. Please provide the name of the repository and/or a link to the commit you need removed.
Tell your collaborators to rebase, not merge, any branches they created off of your old (tainted) repository history. One merge commit could reintroduce some or all of the tainted history that you just went to the trouble of purging.
After some time has passed and you're confident that the BFG tool /
git filter-repohad no unintended side effects, you can force all objects in your local repository to be dereferenced and garbage collected with the following commands (using Git 1.8.5 or newer):
git for-each-ref --format="delete %(refname)" refs/original | git update-ref --stdin git reflog expire --expire=now --all git gc --prune=now Counting objects: 2437, done. Delta compression using up to 4 threads. Compressing objects: 100% (1378/1378), done. Writing objects: 100% (2437/2437), done. Total 2437 (delta 1461), reused 1802 (delta 1048)
Note: You can also achieve this by pushing your filtered history to a new or empty repository and then making a fresh clone from GitHub.
Preventing contributors from making accidental commits can help you prevent sensitive information from being exposed. For more information see "Best practices for preventing data leaks in your organization."
There are a few simple tricks to avoid committing things you don't want committed:
- Use a visual program like GitHub Desktop or gitk to commit changes. Visual programs generally make it easier to see exactly which files will be added, deleted, and modified with each commit.
- Avoid the catch-all commands
git add .and
git commit -aon the command line—use
git add filenameand
git rm filenameto individually stage files, instead.
git add --interactiveto individually review and stage changes within each file.
git diff --cachedto review the changes that you have staged for commit. This is the exact diff that
git commitwill produce as long as you don't use the