Workflows

REST API を使って、GitHub Actions のワークフローを操作します。

GitHub Actions のワークフローについて

REST API を使って、GitHub Actions でのリポジトリに対するワークフローを見ることができます。ワークフローは、豊富なツールとサービスでソフトウェア開発のライフサイクルを自動化します。詳細については、「GitHub Actionsのドキュメント」を参照してください。

このエンドポイントは、認証されたユーザー、OAuth Apps、GitHub Apps で使用できます。アクセストークンには、プライベートリポジトリの repo スコープとパブリックリポジトリの public_repo スコープが必要です。 GitHub Apps でこれらのエンドポイントを使うには、actions アクセス許可が必要です。

List repository workflows

に対応 GitHub Apps

Lists the workflows in a repository. Anyone with read access to the repository can use this endpoint. If the repository is private you must use an access token with the repo scope. GitHub Apps must have the actions:read permission to use this endpoint.

"List repository workflows" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.
パスパラメーター
名前, Type, 説明
`owner` string 必須 The account owner of the repository. The name is not case sensitive.
`repo` string 必須 The name of the repository. The name is not case sensitive.
クエリパラメーター
名前, Type, 説明
`per_page` integer The number of results per page (max 100). Default: `30`
`page` integer Page number of the results to fetch. Default: `1`

"List repository workflows" の HTTP 応答状態コード

状態コード	説明
`200`	OK

"List repository workflows" のコードサンプル

get/repos/{owner}/{repo}/actions/workflows

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  http(s)://HOSTNAME/api/v3/repos/OWNER/REPO/actions/workflows

Response

Status: 200

{
  "total_count": 2,
  "workflows": [
    {
      "id": 161335,
      "node_id": "MDg6V29ya2Zsb3cxNjEzMzU=",
      "name": "CI",
      "path": ".github/workflows/blank.yaml",
      "state": "active",
      "created_at": "2020-01-08T23:48:37.000-08:00",
      "updated_at": "2020-01-08T23:50:21.000-08:00",
      "url": "https://HOSTNAME/repos/octo-org/octo-repo/actions/workflows/161335",
      "html_url": "https://github.com/octo-org/octo-repo/blob/master/.github/workflows/161335",
      "badge_url": "https://github.com/octo-org/octo-repo/workflows/CI/badge.svg"
    },
    {
      "id": 269289,
      "node_id": "MDE4OldvcmtmbG93IFNlY29uZGFyeTI2OTI4OQ==",
      "name": "Linter",
      "path": ".github/workflows/linter.yaml",
      "state": "active",
      "created_at": "2020-01-08T23:48:37.000-08:00",
      "updated_at": "2020-01-08T23:50:21.000-08:00",
      "url": "https://HOSTNAME/repos/octo-org/octo-repo/actions/workflows/269289",
      "html_url": "https://github.com/octo-org/octo-repo/blob/master/.github/workflows/269289",
      "badge_url": "https://github.com/octo-org/octo-repo/workflows/Linter/badge.svg"
    }
  ]
}

Get a workflow

に対応 GitHub Apps

Gets a specific workflow. You can replace workflow_id with the workflow file name. For example, you could use main.yaml. Anyone with read access to the repository can use this endpoint. If the repository is private you must use an access token with the repo scope. GitHub Apps must have the actions:read permission to use this endpoint.

"Get a workflow" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.
パスパラメーター
名前, Type, 説明
`owner` string 必須 The account owner of the repository. The name is not case sensitive.
`repo` string 必須 The name of the repository. The name is not case sensitive.
`workflow_id` 必須 The ID of the workflow. You can also pass the workflow file name as a string.

"Get a workflow" の HTTP 応答状態コード

状態コード	説明
`200`	OK

"Get a workflow" のコードサンプル

get/repos/{owner}/{repo}/actions/workflows/{workflow_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  http(s)://HOSTNAME/api/v3/repos/OWNER/REPO/actions/workflows/WORKFLOW_ID

Response

Status: 200

{
  "id": 161335,
  "node_id": "MDg6V29ya2Zsb3cxNjEzMzU=",
  "name": "CI",
  "path": ".github/workflows/blank.yaml",
  "state": "active",
  "created_at": "2020-01-08T23:48:37.000-08:00",
  "updated_at": "2020-01-08T23:50:21.000-08:00",
  "url": "https://HOSTNAME/repos/octo-org/octo-repo/actions/workflows/161335",
  "html_url": "https://github.com/octo-org/octo-repo/blob/master/.github/workflows/161335",
  "badge_url": "https://github.com/octo-org/octo-repo/workflows/CI/badge.svg"
}

Disable a workflow

に対応 GitHub Apps

Disables a workflow and sets the state of the workflow to disabled_manually. You can replace workflow_id with the workflow file name. For example, you could use main.yaml.

You must authenticate using an access token with the repo scope to use this endpoint. GitHub Apps must have the actions:write permission to use this endpoint.

"Disable a workflow" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.
パスパラメーター
名前, Type, 説明
`owner` string 必須 The account owner of the repository. The name is not case sensitive.
`repo` string 必須 The name of the repository. The name is not case sensitive.
`workflow_id` 必須 The ID of the workflow. You can also pass the workflow file name as a string.

"Disable a workflow" の HTTP 応答状態コード

状態コード	説明
`204`	No Content

"Disable a workflow" のコードサンプル

put/repos/{owner}/{repo}/actions/workflows/{workflow_id}/disable

curl -L \
  -X PUT \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  http(s)://HOSTNAME/api/v3/repos/OWNER/REPO/actions/workflows/WORKFLOW_ID/disable

Response

Status: 204

Create a workflow dispatch event

に対応 GitHub Apps

You can use this endpoint to manually trigger a GitHub Actions workflow run. You can replace workflow_id with the workflow file name. For example, you could use main.yaml.

You must configure your GitHub Actions workflow to run when the workflow_dispatch webhook event occurs. The inputs are configured in the workflow file. For more information about how to configure the workflow_dispatch event in the workflow file, see "Events that trigger workflows."

You must authenticate using an access token with the repo scope to use this endpoint. GitHub Apps must have the actions:write permission to use this endpoint. For more information, see "Creating a personal access token for the command line."

"Create a workflow dispatch event" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.
パスパラメーター
名前, Type, 説明
`owner` string 必須 The account owner of the repository. The name is not case sensitive.
`repo` string 必須 The name of the repository. The name is not case sensitive.
`workflow_id` 必須 The ID of the workflow. You can also pass the workflow file name as a string.
本文のパラメーター
名前, Type, 説明
`ref` string 必須 The git reference for the workflow. The reference can be a branch or tag name.
`inputs` object Input keys and values configured in the workflow file. The maximum number of properties is 10. Any default properties configured in the workflow file will be used when `inputs` are omitted.

"Create a workflow dispatch event" の HTTP 応答状態コード

状態コード	説明
`204`	No Content

"Create a workflow dispatch event" のコードサンプル

post/repos/{owner}/{repo}/actions/workflows/{workflow_id}/dispatches

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  http(s)://HOSTNAME/api/v3/repos/OWNER/REPO/actions/workflows/WORKFLOW_ID/dispatches \
  -d '{"ref":"topic-branch","inputs":{"name":"Mona the Octocat","home":"San Francisco, CA"}}'

Response

Status: 204

Enable a workflow

に対応 GitHub Apps

Enables a workflow and sets the state of the workflow to active. You can replace workflow_id with the workflow file name. For example, you could use main.yaml.

You must authenticate using an access token with the repo scope to use this endpoint. GitHub Apps must have the actions:write permission to use this endpoint.

"Enable a workflow" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.
パスパラメーター
名前, Type, 説明
`owner` string 必須 The account owner of the repository. The name is not case sensitive.
`repo` string 必須 The name of the repository. The name is not case sensitive.
`workflow_id` 必須 The ID of the workflow. You can also pass the workflow file name as a string.

"Enable a workflow" の HTTP 応答状態コード

状態コード	説明
`204`	No Content

"Enable a workflow" のコードサンプル

put/repos/{owner}/{repo}/actions/workflows/{workflow_id}/enable

curl -L \
  -X PUT \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  http(s)://HOSTNAME/api/v3/repos/OWNER/REPO/actions/workflows/WORKFLOW_ID/enable

Response

Status: 204