Workflows GitHub Actions
Cet article montre comment utiliser l’API GraphQL et GitHub Actions pour ajouter une demande de tirage (pull request) à un projet d’organisation. Dans l’exemple de workflows, lorsque la demande de tirage est marquée comme « prête pour évaluation », une nouvelle tâche est ajoutée au projet avec un champ « État » défini sur « À faire » et la date actuelle est ajoutée à un champ « Date publié » personnalisé.
Vous pouvez copier l’un des workflows ci-dessous et le modifier comme décrit dans le tableau ci-dessous pour répondre à vos besoins.
Un projet peut s’étendre sur plusieurs référentiels, mais un workflow est spécifique à un référentiel. Ajoutez le flux de travail à chaque référentiel que vous souhaitez suivre pour votre projet. Pour plus d’informations sur la création de fichiers de flux de travail, consultez Démarrage rapide pour GitHub Actions.
Cet article part du principe que vous avez une compréhension de base de GitHub Actions. Pour plus d’informations sur GitHub Actions, consultez Documentation GitHub Actions.
Pour plus d’informations sur les autres modifications que vous pouvez apporter à votre projet via l’API, consultez Utilisation de l’API pour gérer des Projects.
Vous pouvez aussi vouloir utiliser le workflow actions/add-to-project, qui est géré par GitHub et qui ajoute le problème ou la demande de tirage en cours dans le projet spécifié. Pour plus d’informations, consultez le dépôt actions/add-to-project et le fichier README.
Note
GITHUB_TOKEN est délimité au niveau du référentiel et ne peut pas accéder aux projects. Pour accéder aux projects, vous pouvez créer une GitHub App (recommandé pour les projets d’organisation) ou un personal access token (recommandé pour les projets d’utilisateur). Les exemples de workflow pour les deux approches sont présentés ci-dessous.
Exemple de workflow s’authentifiant avec un GitHub App
Pour plus d’informations sur l’authentification dans un flux de travail GitHub Actions avec une GitHub App, consultez Effectuer des requêtes d’API authentifiées avec une application GitHub dans un workflow GitHub Actions.
-
Créez un GitHub App ou choisissez un GitHub App existant appartenant à votre organisation. Pour plus d’informations, consultez « Inscription d’une application GitHub ».
-
Accordez à GitHub App des autorisations de lecture et d’écriture pour les projets de l’organisation. Pour cet exemple spécifique, votre GitHub App a également besoin d’autorisations de lecture pour les demandes de tirage du référentiel et les problèmes du référentiel. Pour plus d’informations, consultez « Modification d’une inscription d’application GitHub ».
Note
Vous pouvez contrôler l’autorisation de votre application pour les projets d’organisation et pour les projets de référentiel. Vous devez accorder l’autorisation de lecture et d’écriture des projets d’organisation ; l’autorisation de lecture et d’écriture des projets de référentiel ne suffit pas.
-
Installation le GitHub App dans votre organisation. Installez-le pour tous les référentiels auxquels votre projet doit accéder. Pour plus d’informations, consultez « Installation de votre propre application GitHub ».
-
Stockez l’ID de votre GitHub App en tant que variable de configuration dans votre référentiel ou organisation. Dans le workflow suivant, remplacez
APP_IDpar le nom de la variable de configuration. Vous pouvez trouver votre ID d’application dans la page Paramètres de votre application ou via l’API d’application. Pour plus d’informations, consultez « Points de terminaison d’API REST pour les applications ». Pour plus d’informations concernant les variables de configuration, consultez Stocker des informations dans des variables. -
Générez une clé privée pour votre application. Stockez le contenu du fichier résultant sous la forme d’un secret dans votre référentiel ou organisation. (Stockez l’intégralité du contenu du fichier, y compris
-----BEGIN RSA PRIVATE KEY-----et-----END RSA PRIVATE KEY-----.) Dans le workflow suivant, remplacezAPP_PEMpar le nom du secret. Pour plus d’informations, consultez « Gestion des clés privées pour les applications GitHub ». Pour plus d’informations sur le stockage de secrets, consultez Utilisation de secrets dans GitHub Actions. -
Dans le workflow suivant, remplacez
YOUR_ORGANIZATIONpar le nom de votre organisation. Par exemple :octo-org. RemplacezYOUR_PROJECT_NUMBERpar votre numéro de projet. Pour trouver le numéro de projet, consultez l’URL du projet. Par exemple,https://github.com/orgs/octo-org/projects/5a pour numéro de projet 5. Pour que cet exemple spécifique fonctionne, votre projet doit également disposer d’un champ de date « Date de publication ».Note
- Ce workflow utilise des actions qui ne sont pas certifiées par GitHub. Elles sont fournies par un tiers et sont régies par des conditions d’utilisation du service, une politique de confidentialité et une documentation de support distinctes.
- GitHub recommande d’épingler les actions à un SHA de commit. Pour obtenir une version plus récente, vous devez mettre à jour le SHA. Vous pouvez également référencer une balise ou une branche, mais l’action peut changer sans avertissement.
#
name: Add PR to project
# This workflow runs whenever a pull request in the repository is marked as "ready for review".
on:
pull_request:
types:
- ready_for_review
jobs:
track_pr:
runs-on: ubuntu-latest
steps:
# Uses the [tibdex/github-app-token](https://github.com/tibdex/github-app-token) action to generate an installation access token for your app from the app ID and private key. The installation access token is accessed later in the workflow as `${{ steps.generate-token.outputs.token }}`.
#
# Replace `APP_ID` with the name of the configuration variable that contains your app ID.
#
# Replace `APP_PEM` with the name of the secret that contains your app private key.
- name: Generate token
id: generate-token
uses: tibdex/github-app-token@32691ba7c9e7063bd457bd8f2a5703138591fa58 # v1.9.0
with:
app_id: ${{ vars.APP_ID }}
private_key: ${{ secrets.APP_PEM }}
# Sets environment variables for this step.
#
# Replace `YOUR_ORGANIZATION` with the name of your organization. For example, `octo-org`.
#
# Replace `YOUR_PROJECT_NUMBER` with your project number. To find the project number, look at the project URL. For example, `https://github.com/orgs/octo-org/projects/5` has a project number of 5.
- name: Get project data
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
ORGANIZATION: YOUR_ORGANIZATION
PROJECT_NUMBER: YOUR_PROJECT_NUMBER
# Uses [GitHub CLI](https://cli.github.com/manual/) to query the API for the ID of the project and return the name and ID of the first 20 fields in the project. `fields` returns a union and the query uses inline fragments (`... on`) to return information about any `ProjectV2Field` and `ProjectV2SingleSelectField` fields. The response is stored in a file called `project_data.json`.
run: |
gh api graphql -f query='
query($org: String!, $number: Int!) {
organization(login: $org){
projectV2(number: $number) {
id
fields(first:20) {
nodes {
... on ProjectV2Field {
id
name
}
... on ProjectV2SingleSelectField {
id
name
options {
id
name
}
}
}
}
}
}
}' -f org=$ORGANIZATION -F number=$PROJECT_NUMBER > project_data.json
# Parses the response from the API query and stores the relevant IDs as environment variables. Modify this to get the ID for different fields or options. For example:
#
# - To get the ID of a field called `Team`, add `echo 'TEAM_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") | .id' project_data.json) >> $GITHUB_ENV`.
# - To get the ID of an option called `Octoteam` for the `Team` single select field, add `echo 'OCTOTEAM_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") |.options[] | select(.name=="Octoteam") |.id' project_data.json) >> $GITHUB_ENV`.
#
# **Note:** This workflow assumes that you have a project with a single select field called "Status" that includes an option called "Todo" and a date field called "Date posted". You must modify this section to match the fields that are present in your table.
echo 'PROJECT_ID='$(jq '.data.organization.projectV2.id' project_data.json) >> $GITHUB_ENV
echo 'DATE_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Date posted") | .id' project_data.json) >> $GITHUB_ENV
echo 'STATUS_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .id' project_data.json) >> $GITHUB_ENV
echo 'TODO_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .options[] | select(.name=="Todo") |.id' project_data.json) >> $GITHUB_ENV
# Sets environment variables for this step. `GH_TOKEN` is the token generated in the first step. `PR_ID` is the ID of the pull request that triggered this workflow.
- name: Add PR to project
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
PR_ID: ${{ github.event.pull_request.node_id }}
# Uses [GitHub CLI](https://cli.github.com/manual/) and the API to add the pull request that triggered this workflow to the project. The `jq` flag parses the response to get the ID of the created item.
run: |
item_id="$( gh api graphql -f query='
mutation($project:ID!, $pr:ID!) {
addProjectV2ItemById(input: {projectId: $project, contentId: $pr}) {
item {
id
}
}
}' -f project=$PROJECT_ID -f pr=$PR_ID --jq '.data.addProjectV2ItemById.item.id')"
# Stores the ID of the created item as an environment variable.
echo 'ITEM_ID='$item_id >> $GITHUB_ENV
# Saves the current date as an environment variable in `yyyy-mm-dd` format.
- name: Get date
run: echo "DATE=$(date +"%Y-%m-%d")" >> $GITHUB_ENV
# Sets environment variables for this step. `GH_TOKEN` is the token generated in the first step.
- name: Set fields
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
# Sets the value of the `Status` field to `Todo`. Sets the value of the `Date posted` field.
run: |
gh api graphql -f query='
mutation (
$project: ID!
$item: ID!
$status_field: ID!
$status_value: String!
$date_field: ID!
$date_value: Date!
) {
set_status: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $status_field
value: {
singleSelectOptionId: $status_value
}
}) {
projectV2Item {
id
}
}
set_date_posted: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $date_field
value: {
date: $date_value
}
}) {
projectV2Item {
id
}
}
}' -f project=$PROJECT_ID -f item=$ITEM_ID -f status_field=$STATUS_FIELD_ID -f status_value=${{ env.TODO_OPTION_ID }} -f date_field=$DATE_FIELD_ID -f date_value=$DATE --silent
name: Add PR to projecton:
pull_request:
types:
- ready_for_review
jobs:
track_pr:
runs-on: ubuntu-latest
steps:This workflow runs whenever a pull request in the repository is marked as "ready for review".
- name: Generate token
id: generate-token
uses: tibdex/github-app-token@32691ba7c9e7063bd457bd8f2a5703138591fa58 # v1.9.0
with:
app_id: ${{ vars.APP_ID }}
private_key: ${{ secrets.APP_PEM }}Uses the tibdex/github-app-token action to generate an installation access token for your app from the app ID and private key. The installation access token is accessed later in the workflow as ${{ steps.generate-token.outputs.token }}.
Replace APP_ID with the name of the configuration variable that contains your app ID.
Replace APP_PEM with the name of the secret that contains your app private key.
- name: Get project data
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
ORGANIZATION: YOUR_ORGANIZATION
PROJECT_NUMBER: YOUR_PROJECT_NUMBERSets environment variables for this step.
Replace YOUR_ORGANIZATION with the name of your organization. For example, octo-org.
Replace YOUR_PROJECT_NUMBER with your project number. To find the project number, look at the project URL. For example, https://github.com/orgs/octo-org/projects/5 has a project number of 5.
run: |
gh api graphql -f query='
query($org: String!, $number: Int!) {
organization(login: $org){
projectV2(number: $number) {
id
fields(first:20) {
nodes {
... on ProjectV2Field {
id
name
}
... on ProjectV2SingleSelectField {
id
name
options {
id
name
}
}
}
}
}
}
}' -f org=$ORGANIZATION -F number=$PROJECT_NUMBER > project_data.jsonUses GitHub CLI to query the API for the ID of the project and return the name and ID of the first 20 fields in the project. fields returns a union and the query uses inline fragments (... on) to return information about any ProjectV2Field and ProjectV2SingleSelectField fields. The response is stored in a file called project_data.json.
echo 'PROJECT_ID='$(jq '.data.organization.projectV2.id' project_data.json) >> $GITHUB_ENV
echo 'DATE_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Date posted") | .id' project_data.json) >> $GITHUB_ENV
echo 'STATUS_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .id' project_data.json) >> $GITHUB_ENV
echo 'TODO_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .options[] | select(.name=="Todo") |.id' project_data.json) >> $GITHUB_ENVParses the response from the API query and stores the relevant IDs as environment variables. Modify this to get the ID for different fields or options. For example:
- To get the ID of a field called
Team, addecho 'TEAM_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") | .id' project_data.json) >> $GITHUB_ENV. - To get the ID of an option called
Octoteamfor theTeamsingle select field, addecho 'OCTOTEAM_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") |.options[] | select(.name=="Octoteam") |.id' project_data.json) >> $GITHUB_ENV.
Note: This workflow assumes that you have a project with a single select field called "Status" that includes an option called "Todo" and a date field called "Date posted". You must modify this section to match the fields that are present in your table.
- name: Add PR to project
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
PR_ID: ${{ github.event.pull_request.node_id }}Sets environment variables for this step. GH_TOKEN is the token generated in the first step. PR_ID is the ID of the pull request that triggered this workflow.
run: |
item_id="$( gh api graphql -f query='
mutation($project:ID!, $pr:ID!) {
addProjectV2ItemById(input: {projectId: $project, contentId: $pr}) {
item {
id
}
}
}' -f project=$PROJECT_ID -f pr=$PR_ID --jq '.data.addProjectV2ItemById.item.id')"Uses GitHub CLI and the API to add the pull request that triggered this workflow to the project. The jq flag parses the response to get the ID of the created item.
echo 'ITEM_ID='$item_id >> $GITHUB_ENVStores the ID of the created item as an environment variable.
- name: Get date
run: echo "DATE=$(date +"%Y-%m-%d")" >> $GITHUB_ENVSaves the current date as an environment variable in yyyy-mm-dd format.
- name: Set fields
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}Sets environment variables for this step. GH_TOKEN is the token generated in the first step.
run: |
gh api graphql -f query='
mutation (
$project: ID!
$item: ID!
$status_field: ID!
$status_value: String!
$date_field: ID!
$date_value: Date!
) {
set_status: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $status_field
value: {
singleSelectOptionId: $status_value
}
}) {
projectV2Item {
id
}
}
set_date_posted: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $date_field
value: {
date: $date_value
}
}) {
projectV2Item {
id
}
}
}' -f project=$PROJECT_ID -f item=$ITEM_ID -f status_field=$STATUS_FIELD_ID -f status_value=${{ env.TODO_OPTION_ID }} -f date_field=$DATE_FIELD_ID -f date_value=$DATE --silentSets the value of the Status field to Todo. Sets the value of the Date posted field.
#
name: Add PR to project
# This workflow runs whenever a pull request in the repository is marked as "ready for review".
on:
pull_request:
types:
- ready_for_review
jobs:
track_pr:
runs-on: ubuntu-latest
steps:
# Uses the [tibdex/github-app-token](https://github.com/tibdex/github-app-token) action to generate an installation access token for your app from the app ID and private key. The installation access token is accessed later in the workflow as `${{ steps.generate-token.outputs.token }}`.
#
# Replace `APP_ID` with the name of the configuration variable that contains your app ID.
#
# Replace `APP_PEM` with the name of the secret that contains your app private key.
- name: Generate token
id: generate-token
uses: tibdex/github-app-token@32691ba7c9e7063bd457bd8f2a5703138591fa58 # v1.9.0
with:
app_id: ${{ vars.APP_ID }}
private_key: ${{ secrets.APP_PEM }}
# Sets environment variables for this step.
#
# Replace `YOUR_ORGANIZATION` with the name of your organization. For example, `octo-org`.
#
# Replace `YOUR_PROJECT_NUMBER` with your project number. To find the project number, look at the project URL. For example, `https://github.com/orgs/octo-org/projects/5` has a project number of 5.
- name: Get project data
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
ORGANIZATION: YOUR_ORGANIZATION
PROJECT_NUMBER: YOUR_PROJECT_NUMBER
# Uses [GitHub CLI](https://cli.github.com/manual/) to query the API for the ID of the project and return the name and ID of the first 20 fields in the project. `fields` returns a union and the query uses inline fragments (`... on`) to return information about any `ProjectV2Field` and `ProjectV2SingleSelectField` fields. The response is stored in a file called `project_data.json`.
run: |
gh api graphql -f query='
query($org: String!, $number: Int!) {
organization(login: $org){
projectV2(number: $number) {
id
fields(first:20) {
nodes {
... on ProjectV2Field {
id
name
}
... on ProjectV2SingleSelectField {
id
name
options {
id
name
}
}
}
}
}
}
}' -f org=$ORGANIZATION -F number=$PROJECT_NUMBER > project_data.json
# Parses the response from the API query and stores the relevant IDs as environment variables. Modify this to get the ID for different fields or options. For example:
#
# - To get the ID of a field called `Team`, add `echo 'TEAM_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") | .id' project_data.json) >> $GITHUB_ENV`.
# - To get the ID of an option called `Octoteam` for the `Team` single select field, add `echo 'OCTOTEAM_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") |.options[] | select(.name=="Octoteam") |.id' project_data.json) >> $GITHUB_ENV`.
#
# **Note:** This workflow assumes that you have a project with a single select field called "Status" that includes an option called "Todo" and a date field called "Date posted". You must modify this section to match the fields that are present in your table.
echo 'PROJECT_ID='$(jq '.data.organization.projectV2.id' project_data.json) >> $GITHUB_ENV
echo 'DATE_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Date posted") | .id' project_data.json) >> $GITHUB_ENV
echo 'STATUS_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .id' project_data.json) >> $GITHUB_ENV
echo 'TODO_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .options[] | select(.name=="Todo") |.id' project_data.json) >> $GITHUB_ENV
# Sets environment variables for this step. `GH_TOKEN` is the token generated in the first step. `PR_ID` is the ID of the pull request that triggered this workflow.
- name: Add PR to project
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
PR_ID: ${{ github.event.pull_request.node_id }}
# Uses [GitHub CLI](https://cli.github.com/manual/) and the API to add the pull request that triggered this workflow to the project. The `jq` flag parses the response to get the ID of the created item.
run: |
item_id="$( gh api graphql -f query='
mutation($project:ID!, $pr:ID!) {
addProjectV2ItemById(input: {projectId: $project, contentId: $pr}) {
item {
id
}
}
}' -f project=$PROJECT_ID -f pr=$PR_ID --jq '.data.addProjectV2ItemById.item.id')"
# Stores the ID of the created item as an environment variable.
echo 'ITEM_ID='$item_id >> $GITHUB_ENV
# Saves the current date as an environment variable in `yyyy-mm-dd` format.
- name: Get date
run: echo "DATE=$(date +"%Y-%m-%d")" >> $GITHUB_ENV
# Sets environment variables for this step. `GH_TOKEN` is the token generated in the first step.
- name: Set fields
env:
GH_TOKEN: ${{ steps.generate-token.outputs.token }}
# Sets the value of the `Status` field to `Todo`. Sets the value of the `Date posted` field.
run: |
gh api graphql -f query='
mutation (
$project: ID!
$item: ID!
$status_field: ID!
$status_value: String!
$date_field: ID!
$date_value: Date!
) {
set_status: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $status_field
value: {
singleSelectOptionId: $status_value
}
}) {
projectV2Item {
id
}
}
set_date_posted: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $date_field
value: {
date: $date_value
}
}) {
projectV2Item {
id
}
}
}' -f project=$PROJECT_ID -f item=$ITEM_ID -f status_field=$STATUS_FIELD_ID -f status_value=${{ env.TODO_OPTION_ID }} -f date_field=$DATE_FIELD_ID -f date_value=$DATE --silent
Exemple de workflow s’authentifiant avec un personal access token
- Créez un personal access token (classic) avec les étendues
projectetrepo. Pour plus d’informations, consultez « Gestion de vos jetons d'accès personnels ». - Enregistrez le personal access token en tant que secret dans votre dépôt ou votre organisation.
- Dans le workflow suivant, remplacez
YOUR_TOKENpar le nom du secret. RemplacezYOUR_ORGANIZATIONpar le nom de votre organisation. Par exemple :octo-org. RemplacezYOUR_PROJECT_NUMBERpar votre numéro de projet. Pour trouver le numéro de projet, consultez l’URL du projet. Par exemple,https://github.com/orgs/octo-org/projects/5a pour numéro de projet 5.
# This workflow runs whenever a pull request in the repository is marked as "ready for review".
name: Add PR to project
on:
pull_request:
types:
- ready_for_review
jobs:
track_pr:
runs-on: ubuntu-latest
steps:
# Sets environment variables for this step.
#
# If you are using a personal access token, replace `YOUR_TOKEN` with the name of the secret that contains your personal access token.
#
# Replace `YOUR_ORGANIZATION` with the name of your organization. For example, `octo-org`.
#
# Replace `YOUR_PROJECT_NUMBER` with your project number. To find the project number, look at the project URL. For example, `https://github.com/orgs/octo-org/projects/5` has a project number of 5.
- name: Get project data
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
ORGANIZATION: YOUR_ORGANIZATION
PROJECT_NUMBER: YOUR_PROJECT_NUMBER
# Uses [GitHub CLI](https://cli.github.com/manual/) to query the API for the ID of the project and return the name and ID of the first 20 fields in the project. `fields` returns a union and the query uses inline fragments (`... on`) to return information about any `ProjectV2Field` and `ProjectV2SingleSelectField` fields. The response is stored in a file called `project_data.json`.
run: |
gh api graphql -f query='
query($org: String!, $number: Int!) {
organization(login: $org){
projectV2(number: $number) {
id
fields(first:20) {
nodes {
... on ProjectV2Field {
id
name
}
... on ProjectV2SingleSelectField {
id
name
options {
id
name
}
}
}
}
}
}
}' -f org=$ORGANIZATION -F number=$PROJECT_NUMBER > project_data.json
# Parses the response from the API query and stores the relevant IDs as environment variables. Modify this to get the ID for different fields or options. For example:
#
# - To get the ID of a field called `Team`, add `echo 'TEAM_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") | .id' project_data.json) >> $GITHUB_ENV`.
# - To get the ID of an option called `Octoteam` for the `Team` single select field, add `echo 'OCTOTEAM_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") |.options[] | select(.name=="Octoteam") |.id' project_data.json) >> $GITHUB_ENV`.
#
# **Note:** This workflow assumes that you have a project with a single select field called "Status" that includes an option called "Todo" and a date field called "Date posted". You must modify this section to match the fields that are present in your table.
echo 'PROJECT_ID='$(jq '.data.organization.projectV2.id' project_data.json) >> $GITHUB_ENV
echo 'DATE_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Date posted") | .id' project_data.json) >> $GITHUB_ENV
echo 'STATUS_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .id' project_data.json) >> $GITHUB_ENV
echo 'TODO_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .options[] | select(.name=="Todo") |.id' project_data.json) >> $GITHUB_ENV
# Sets environment variables for this step. Replace `YOUR_TOKEN` with the name of the secret that contains your personal access token.
- name: Add PR to project
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
PR_ID: ${{ github.event.pull_request.node_id }}
# Uses [GitHub CLI](https://cli.github.com/manual/) and the API to add the pull request that triggered this workflow to the project. The `jq` flag parses the response to get the ID of the created item.
run: |
item_id="$( gh api graphql -f query='
mutation($project:ID!, $pr:ID!) {
addProjectV2ItemById(input: {projectId: $project, contentId: $pr}) {
item {
id
}
}
}' -f project=$PROJECT_ID -f pr=$PR_ID --jq '.data.addProjectV2ItemById.item.id')"
# Stores the ID of the created item as an environment variable.
echo 'ITEM_ID='$item_id >> $GITHUB_ENV
# Saves the current date as an environment variable in `yyyy-mm-dd` format.
- name: Get date
run: echo "DATE=$(date +"%Y-%m-%d")" >> $GITHUB_ENV
# Sets environment variables for this step. Replace `YOUR_TOKEN` with the name of the secret that contains your personal access token.
- name: Set fields
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
# Sets the value of the `Status` field to `Todo`. Sets the value of the `Date posted` field.
run: |
gh api graphql -f query='
mutation (
$project: ID!
$item: ID!
$status_field: ID!
$status_value: String!
$date_field: ID!
$date_value: Date!
) {
set_status: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $status_field
value: {
singleSelectOptionId: $status_value
}
}) {
projectV2Item {
id
}
}
set_date_posted: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $date_field
value: {
date: $date_value
}
}) {
projectV2Item {
id
}
}
}' -f project=$PROJECT_ID -f item=$ITEM_ID -f status_field=$STATUS_FIELD_ID -f status_value=${{ env.TODO_OPTION_ID }} -f date_field=$DATE_FIELD_ID -f date_value=$DATE --silent
name: Add PR to project
on:
pull_request:
types:
- ready_for_review
jobs:
track_pr:
runs-on: ubuntu-latest
steps:This workflow runs whenever a pull request in the repository is marked as "ready for review".
- name: Get project data
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
ORGANIZATION: YOUR_ORGANIZATION
PROJECT_NUMBER: YOUR_PROJECT_NUMBERSets environment variables for this step.
If you are using a personal access token, replace YOUR_TOKEN with the name of the secret that contains your personal access token.
Replace YOUR_ORGANIZATION with the name of your organization. For example, octo-org.
Replace YOUR_PROJECT_NUMBER with your project number. To find the project number, look at the project URL. For example, https://github.com/orgs/octo-org/projects/5 has a project number of 5.
run: |
gh api graphql -f query='
query($org: String!, $number: Int!) {
organization(login: $org){
projectV2(number: $number) {
id
fields(first:20) {
nodes {
... on ProjectV2Field {
id
name
}
... on ProjectV2SingleSelectField {
id
name
options {
id
name
}
}
}
}
}
}
}' -f org=$ORGANIZATION -F number=$PROJECT_NUMBER > project_data.jsonUses GitHub CLI to query the API for the ID of the project and return the name and ID of the first 20 fields in the project. fields returns a union and the query uses inline fragments (... on) to return information about any ProjectV2Field and ProjectV2SingleSelectField fields. The response is stored in a file called project_data.json.
echo 'PROJECT_ID='$(jq '.data.organization.projectV2.id' project_data.json) >> $GITHUB_ENV
echo 'DATE_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Date posted") | .id' project_data.json) >> $GITHUB_ENV
echo 'STATUS_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .id' project_data.json) >> $GITHUB_ENV
echo 'TODO_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .options[] | select(.name=="Todo") |.id' project_data.json) >> $GITHUB_ENVParses the response from the API query and stores the relevant IDs as environment variables. Modify this to get the ID for different fields or options. For example:
- To get the ID of a field called
Team, addecho 'TEAM_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") | .id' project_data.json) >> $GITHUB_ENV. - To get the ID of an option called
Octoteamfor theTeamsingle select field, addecho 'OCTOTEAM_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") |.options[] | select(.name=="Octoteam") |.id' project_data.json) >> $GITHUB_ENV.
Note: This workflow assumes that you have a project with a single select field called "Status" that includes an option called "Todo" and a date field called "Date posted". You must modify this section to match the fields that are present in your table.
- name: Add PR to project
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
PR_ID: ${{ github.event.pull_request.node_id }}Sets environment variables for this step. Replace YOUR_TOKEN with the name of the secret that contains your personal access token.
run: |
item_id="$( gh api graphql -f query='
mutation($project:ID!, $pr:ID!) {
addProjectV2ItemById(input: {projectId: $project, contentId: $pr}) {
item {
id
}
}
}' -f project=$PROJECT_ID -f pr=$PR_ID --jq '.data.addProjectV2ItemById.item.id')"Uses GitHub CLI and the API to add the pull request that triggered this workflow to the project. The jq flag parses the response to get the ID of the created item.
echo 'ITEM_ID='$item_id >> $GITHUB_ENVStores the ID of the created item as an environment variable.
- name: Get date
run: echo "DATE=$(date +"%Y-%m-%d")" >> $GITHUB_ENVSaves the current date as an environment variable in yyyy-mm-dd format.
- name: Set fields
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}Sets environment variables for this step. Replace YOUR_TOKEN with the name of the secret that contains your personal access token.
run: |
gh api graphql -f query='
mutation (
$project: ID!
$item: ID!
$status_field: ID!
$status_value: String!
$date_field: ID!
$date_value: Date!
) {
set_status: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $status_field
value: {
singleSelectOptionId: $status_value
}
}) {
projectV2Item {
id
}
}
set_date_posted: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $date_field
value: {
date: $date_value
}
}) {
projectV2Item {
id
}
}
}' -f project=$PROJECT_ID -f item=$ITEM_ID -f status_field=$STATUS_FIELD_ID -f status_value=${{ env.TODO_OPTION_ID }} -f date_field=$DATE_FIELD_ID -f date_value=$DATE --silentSets the value of the Status field to Todo. Sets the value of the Date posted field.
# This workflow runs whenever a pull request in the repository is marked as "ready for review".
name: Add PR to project
on:
pull_request:
types:
- ready_for_review
jobs:
track_pr:
runs-on: ubuntu-latest
steps:
# Sets environment variables for this step.
#
# If you are using a personal access token, replace `YOUR_TOKEN` with the name of the secret that contains your personal access token.
#
# Replace `YOUR_ORGANIZATION` with the name of your organization. For example, `octo-org`.
#
# Replace `YOUR_PROJECT_NUMBER` with your project number. To find the project number, look at the project URL. For example, `https://github.com/orgs/octo-org/projects/5` has a project number of 5.
- name: Get project data
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
ORGANIZATION: YOUR_ORGANIZATION
PROJECT_NUMBER: YOUR_PROJECT_NUMBER
# Uses [GitHub CLI](https://cli.github.com/manual/) to query the API for the ID of the project and return the name and ID of the first 20 fields in the project. `fields` returns a union and the query uses inline fragments (`... on`) to return information about any `ProjectV2Field` and `ProjectV2SingleSelectField` fields. The response is stored in a file called `project_data.json`.
run: |
gh api graphql -f query='
query($org: String!, $number: Int!) {
organization(login: $org){
projectV2(number: $number) {
id
fields(first:20) {
nodes {
... on ProjectV2Field {
id
name
}
... on ProjectV2SingleSelectField {
id
name
options {
id
name
}
}
}
}
}
}
}' -f org=$ORGANIZATION -F number=$PROJECT_NUMBER > project_data.json
# Parses the response from the API query and stores the relevant IDs as environment variables. Modify this to get the ID for different fields or options. For example:
#
# - To get the ID of a field called `Team`, add `echo 'TEAM_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") | .id' project_data.json) >> $GITHUB_ENV`.
# - To get the ID of an option called `Octoteam` for the `Team` single select field, add `echo 'OCTOTEAM_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Team") |.options[] | select(.name=="Octoteam") |.id' project_data.json) >> $GITHUB_ENV`.
#
# **Note:** This workflow assumes that you have a project with a single select field called "Status" that includes an option called "Todo" and a date field called "Date posted". You must modify this section to match the fields that are present in your table.
echo 'PROJECT_ID='$(jq '.data.organization.projectV2.id' project_data.json) >> $GITHUB_ENV
echo 'DATE_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Date posted") | .id' project_data.json) >> $GITHUB_ENV
echo 'STATUS_FIELD_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .id' project_data.json) >> $GITHUB_ENV
echo 'TODO_OPTION_ID='$(jq '.data.organization.projectV2.fields.nodes[] | select(.name== "Status") | .options[] | select(.name=="Todo") |.id' project_data.json) >> $GITHUB_ENV
# Sets environment variables for this step. Replace `YOUR_TOKEN` with the name of the secret that contains your personal access token.
- name: Add PR to project
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
PR_ID: ${{ github.event.pull_request.node_id }}
# Uses [GitHub CLI](https://cli.github.com/manual/) and the API to add the pull request that triggered this workflow to the project. The `jq` flag parses the response to get the ID of the created item.
run: |
item_id="$( gh api graphql -f query='
mutation($project:ID!, $pr:ID!) {
addProjectV2ItemById(input: {projectId: $project, contentId: $pr}) {
item {
id
}
}
}' -f project=$PROJECT_ID -f pr=$PR_ID --jq '.data.addProjectV2ItemById.item.id')"
# Stores the ID of the created item as an environment variable.
echo 'ITEM_ID='$item_id >> $GITHUB_ENV
# Saves the current date as an environment variable in `yyyy-mm-dd` format.
- name: Get date
run: echo "DATE=$(date +"%Y-%m-%d")" >> $GITHUB_ENV
# Sets environment variables for this step. Replace `YOUR_TOKEN` with the name of the secret that contains your personal access token.
- name: Set fields
env:
GH_TOKEN: ${{ secrets.YOUR_TOKEN }}
# Sets the value of the `Status` field to `Todo`. Sets the value of the `Date posted` field.
run: |
gh api graphql -f query='
mutation (
$project: ID!
$item: ID!
$status_field: ID!
$status_value: String!
$date_field: ID!
$date_value: Date!
) {
set_status: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $status_field
value: {
singleSelectOptionId: $status_value
}
}) {
projectV2Item {
id
}
}
set_date_posted: updateProjectV2ItemFieldValue(input: {
projectId: $project
itemId: $item
fieldId: $date_field
value: {
date: $date_value
}
}) {
projectV2Item {
id
}
}
}' -f project=$PROJECT_ID -f item=$ITEM_ID -f status_field=$STATUS_FIELD_ID -f status_value=${{ env.TODO_OPTION_ID }} -f date_field=$DATE_FIELD_ID -f date_value=$DATE --silent