Skip to main content
Frecuentemente publicamos actualizaciones de nuestra documentación. Es posible que la traducción de esta página esté en curso. Para conocer la información más actual, visita la documentación en inglés. Si existe un problema con las traducciones en esta página, por favor infórmanos.

Esta versión de GitHub Enterprise se discontinuó el 2022-06-03. No se realizarán lanzamientos de patch, ni siquiera para problemas de seguridad críticos. Para obtener un mejor desempeño, más seguridad y nuevas características, actualiza a la última versión de GitHub Enterprise. Para obtener ayuda con la actualización, contacta al soporte de GitHub Enterprise.

Building and testing PowerShell

You can create a continuous integration (CI) workflow to build and test your PowerShell project.

Nota: Los ejecutores hospedados en GitHub no son compatibles con GitHub Enterprise Server actualmente. Puedes encontrar más información sobre el soporte que se tiene planeado en el futuro en el Itinerario público de GitHub.

Introduction

This guide shows you how to use PowerShell for CI. It describes how to use Pester, install dependencies, test your module, and publish to the PowerShell Gallery.

GitHub-hosted runners have a tools cache with pre-installed software, which includes PowerShell and Pester.

For a full list of up-to-date software and the pre-installed versions of PowerShell and Pester, see "Specifications for GitHub-hosted runners".

Prerequisites

You should be familiar with YAML and the syntax for GitHub Actions. For more information, see "Learn GitHub Actions."

We recommend that you have a basic understanding of PowerShell and Pester. For more information, see:

Utilizar ejecutores auto-hospedados en GitHub Enterprise Server

Cuando utilices acciones de configuración, (tales como actions/setup-LANGUAGE) en GitHub Enterprise Server con ejecutores auto-hospedados, tal vez necesites configurar el caché de las herramientas en los ejecutores que no tienen acceso a internet. Para obtener más información, consulta la sección " Configurar el caché de herramientas en ejecutores auto-hospedados sin acceso a internet".

Adding a workflow for Pester

To automate your testing with PowerShell and Pester, you can add a workflow that runs every time a change is pushed to your repository. In the following example, Test-Path is used to check that a file called resultsfile.log is present.

This example workflow file must be added to your repository's .github/workflows/ directory:

name: Test PowerShell on Ubuntu
on: push

jobs:
  pester-test:
    name: Pester test
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v2
      - name: Perform a Pester test from the command-line
        shell: pwsh
        run: Test-Path resultsfile.log | Should -Be $true
      - name: Perform a Pester test from the Tests.ps1 file
        shell: pwsh
        run: |
          Invoke-Pester Unit.Tests.ps1 -Passthru
  • shell: pwsh - Configures the job to use PowerShell when running the run commands.

  • run: Test-Path resultsfile.log - Check whether a file called resultsfile.log is present in the repository's root directory.

  • Should -Be $true - Uses Pester to define an expected result. If the result is unexpected, then GitHub Actions flags this as a failed test. For example:

    Failed Pester test

  • Invoke-Pester Unit.Tests.ps1 -Passthru - Uses Pester to execute tests defined in a file called Unit.Tests.ps1. For example, to perform the same test described above, the Unit.Tests.ps1 will contain the following:
    Describe "Check results file is present" {
        It "Check results file is present" {
            Test-Path resultsfile.log | Should -Be $true
        }
    }
    

PowerShell module locations

The table below describes the locations for various PowerShell modules in each GitHub-hosted runner.

UbuntumacOSWindows
PowerShell system modules/opt/microsoft/powershell/7/Modules/*/usr/local/microsoft/powershell/7/Modules/*C:\program files\powershell\7\Modules\*
PowerShell add-on modules/usr/local/share/powershell/Modules/*/usr/local/share/powershell/Modules/*C:\Modules\*
User-installed modules/home/runner/.local/share/powershell/Modules/*/Users/runner/.local/share/powershell/Modules/*C:\Users\runneradmin\Documents\PowerShell\Modules\*

Installing dependencies

GitHub-hosted runners have PowerShell 7 and Pester installed. You can use Install-Module to install additional dependencies from the PowerShell Gallery before building and testing your code.

Note: The pre-installed packages (such as Pester) used by GitHub-hosted runners are regularly updated, and can introduce significant changes. As a result, it is recommended that you always specify the required package versions by using Install-Module with -MaximumVersion.

For example, the following job installs the SqlServer and PSScriptAnalyzer modules:

jobs:
  install-dependencies:
    name: Install dependencies
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - name: Install from PSGallery
        shell: pwsh
        run: |
          Set-PSRepository PSGallery -InstallationPolicy Trusted
          Install-Module SqlServer, PSScriptAnalyzer

Note: By default, no repositories are trusted by PowerShell. When installing modules from the PowerShell Gallery, you must explicitly set the installation policy for PSGallery to Trusted.

Testing your code

You can use the same commands that you use locally to build and test your code.

Using PSScriptAnalyzer to lint code

The following example installs PSScriptAnalyzer and uses it to lint all ps1 files in the repository. For more information, see PSScriptAnalyzer on GitHub.

  lint-with-PSScriptAnalyzer:
    name: Install and run PSScriptAnalyzer
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - name: Install PSScriptAnalyzer module
        shell: pwsh
        run: |
          Set-PSRepository PSGallery -InstallationPolicy Trusted
          Install-Module PSScriptAnalyzer -ErrorAction Stop
      - name: Lint with PSScriptAnalyzer
        shell: pwsh
        run: |
          Invoke-ScriptAnalyzer -Path *.ps1 -Recurse -Outvariable issues
          $errors   = $issues.Where({$_.Severity -eq 'Error'})
          $warnings = $issues.Where({$_.Severity -eq 'Warning'})
          if ($errors) {
              Write-Error "There were $($errors.Count) errors and $($warnings.Count) warnings total." -ErrorAction Stop
          } else {
              Write-Output "There were $($errors.Count) errors and $($warnings.Count) warnings total."
          }

Packaging workflow data as artifacts

You can upload artifacts to view after a workflow completes. For example, you may need to save log files, core dumps, test results, or screenshots. For more information, see "Persisting workflow data using artifacts."

The following example demonstrates how you can use the upload-artifact action to archive the test results received from Invoke-Pester. For more information, see the upload-artifact action.

name: Upload artifact from Ubuntu

on: [push]

jobs:
  upload-pester-results:
    name: Run Pester and upload results
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - name: Test with Pester
        shell: pwsh
        run: Invoke-Pester Unit.Tests.ps1 -Passthru | Export-CliXml -Path Unit.Tests.xml
      - name: Upload test results
        uses: actions/upload-artifact@v2
        with:
          name: ubuntu-Unit-Tests
          path: Unit.Tests.xml
    if: ${{ always() }}

The always() function configures the job to continue processing even if there are test failures. For more information, see "always."

You can configure your workflow to publish your PowerShell module to the PowerShell Gallery when your CI tests pass. You can use secrets to store any tokens or credentials needed to publish your package. For more information, see "Creating and using encrypted secrets."

The following example creates a package and uses Publish-Module to publish it to the PowerShell Gallery:

name: Publish PowerShell Module

on:
  release:
    types: [created]

jobs:
  publish-to-gallery:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - name: Build and publish
        env:
          NUGET_KEY: ${{ secrets.NUGET_KEY }}
        shell: pwsh
        run: |
          ./build.ps1 -Path /tmp/samplemodule
          Publish-Module -Path /tmp/samplemodule -NuGetApiKey $env:NUGET_KEY -Verbose